SouthFL.02.SS

So far so good.
She idles nice with a great lope.
With the cut-out open it's mad wicked !
My friend did most of the install, I helped out here and there.
She's definately a winner. Now it's time for a tune.
I have video/sound for anyone interested. Just ask me to send it to ya.
I'd like to thank JMX for all the great info online.
***Also, Note!*** PEN MAGNETS SAVED OUR ***! One lifter pulled the magnet down, but the bent out clip caught it(whew!).

Dom

iTrader: (2)

Nice cam. Make sure to dyno that once you get it tuned. How is the power down low? I bet it picked up a ton at the top. How high are you planning on shifting? Is there a big lope with the exhaust on?

I'd like to see the video.
camarospeed78@hotmail.com

SouthFL.02.SS

The tune will be a full LS1Edit Dyno tune.
Power down low is fine (better than I thought it would be, now the Nitto's break loose in 1st).
At top she pulls HARD.
4-3 downshifts break the tires loose at 70mph.
Big lope is heard through the exhaust. BIGGER lope is heard with the cutout open.
Sending vid.

Trevor @ Texas Speed & Perf.

iTrader: (3)

I'm glad to hear that the new cam is in and running well. The idle will bring a smile to your face. Let us know how she does once tuned in on the dyno.

Trevor

SouthFL.02.SS

Will do!

John02SS

iTrader: (47)

Hit me with the vid! On the market for a camshaft. john.weeks@mchsi.com Thanks man!

SouthFL.02.SS

I've sent out emails with vids. Be patient, my dial up is sloooooooww......
DOM, your email bounced back.

maddboost

iTrader: (11)

Bounce that vid over to me at maddboost@hotmail.com plz.

Trojan T/A

iTrader: (1)

I would like to see the video and may be able to host it for you for a week or so depending on size. chutchin@usc.edu

SouthFL.02.SS

Sending it, please host.
Thanks.

1BadAzzWS6

iTrader: (11)

can you send me the vid too...
thanx

zkosojet@comcast.net

xchaos

I would like to see the vid too!

justin@advantexmail.net

If going to be hosted...I'll wait on that!

Thanks

FACE

I'm installing a simular cam very soon. Can you send me the vid?
When do you plan on getting the car tuned/dynoed? How about hitting the strip?

gomer

iTrader: (13)

Go ahead and get you one!! I LOVE mine, this cam absolutely ROCKS. Btw.. are you going to be at MMP on Oct 25? I'll have my car down there then and you can see how nice it drives!

Trojan T/A

iTrader: (1)

Ok here is the clip. It sounds nice, but I think it would sound better with my dual exhaust.

TSP_231_237.wmv

WS6Clint

What valve springs did you use?

John02SS

iTrader: (47)

That may be a little more than I can handle as a daily driver! I have to work the 25th, but will be at the Thunder Shootout the 8th and 9th of Nov. Are you coming over to that. Hell you can come to Pensacola and stay the night at my place and drive over with us early Sat morning.

SouthFL.02.SS

To answer a few from above (in to particular order)...
-It is absolutely tame as a daily driver. It just sounds wicked.
-Comp 918's.
-Tuning will be done on Oct. 20th.
-No track times till November (when the weather cools down here).

Thanks for hosting the vid!

SouthFL.02.SS

X-pipe/ Duals go in this November.....

2003blue5.7

hey guys I'm putting a stck ls1 motor in my 03 silverado. whats a good cam to change to? note that the is mostly a daily driver and I dont have edit "YET"