Anything wrong with Patriot Heads
#21
TECH Resident
iTrader: (7)
Join Date: Sep 2006
Location: Flint, MI
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
For stock casting look at TEA to do port work. They will also port Trickflow stuff. I believe they are right down the street from each other. Either way Brian is very helpful and knows his stuff!
#26
TECH Enthusiast
iTrader: (10)
My cousin has both a set of TEA ported TFS heads and Patriot LS6 heads and he said hands down the TEA work looks best. He got the Patriot heads in a whole car purchase deal and said there is no way he would spend his money to buy a set. Now as far as performance they are holding their own for sure. He's ran a best of 12.009 in the 1/4 with an iron 6.0 with the Patriot heads and an MS3 cam through either a BBK or weiand intake soft launching in +2893 DA. He said with a 12 bolt and 4.10 gears (soon to come) he easily sees this car running low 11s with a good launch in good air.
Here he is running a GT-500 that has extensive work (he's worked on it himself too) and has put down over 600 rwhp on a dyno. The funny part is he only trapped 117 because he let out short of the 1/4 because he forgot to shift to 4th. This was last weekend at Shreveport.
http://www.youtube.com/watch?v=3Wx1D4Efszw
Here he is running a GT-500 that has extensive work (he's worked on it himself too) and has put down over 600 rwhp on a dyno. The funny part is he only trapped 117 because he let out short of the 1/4 because he forgot to shift to 4th. This was last weekend at Shreveport.
http://www.youtube.com/watch?v=3Wx1D4Efszw