Q about oil bolts for oil pump.......
#1
12 Second Club
Thread Starter
iTrader: (17)
Join Date: Sep 2003
Location: Richmond, VA
Posts: 1,199
Likes: 0
Received 0 Likes
on
0 Posts
Q about oil bolts for oil pump.......
I've searched and found a few answers but, I'm dropping my oil pan for my cam install and the two long bolts in the back, closest to the ground, what do they thread into? I loosened them up about a half a turn and they wiggled some. Also, I'm trying to get the last bolt on the driver's side, right where the oil filter screws onto, I can't get to it to loosen it, has anyone else have any trouble with this?
Thanks,
Robbie
Thanks,
Robbie
#2
Under criminal investigation for fraud
iTrader: (-2)
Join Date: Jan 2004
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
The two long back skinny bolts thread into the rear cover. When loosening them they will feel like not much is happening but they are actually coming out. They go through the oil pan gasket that's why they feel like they wiggle.
#4
Originally Posted by TaTommyWS6
Be careful to only torque them in to about 6-8ftlbs. They will snap if you do the usual 18ftlbs, trust me I know from experience!
Tommy
Tommy