Need help guys!!!
10-20-2010, 06:18 PM
#121
Do not torque the oil drain plug, if you do find the factory specified torque spec which is 18 lb/ft.
To do this you take your torque wrench you bought from autozone, attach your 1/2" drive 15mm socket to the wrench. Set the torque to 18 lb/ft.
If you bought an electronic torque wrench you will push the button with the "+" symbol till it reads 18, not 180, but 18. If you have the older style twist then you twist it till you go past the 15 lb/ft mark but stay less than the 20 lb/ft mark.
You then take the wrench and angle it so you can get the 15mm socket around the bolt which has been threaded in by hand. Now go clockwise to tighten and tighten the bolt till it, beeps, clicks, bumps, jumps, or yells. (whatever noise or sound your torque wrench makes) If it makes any of those noises you are done, no more tightening of the bolt is needed.
To do this you take your torque wrench you bought from autozone, attach your 1/2" drive 15mm socket to the wrench. Set the torque to 18 lb/ft.
If you bought an electronic torque wrench you will push the button with the "+" symbol till it reads 18, not 180, but 18. If you have the older style twist then you twist it till you go past the 15 lb/ft mark but stay less than the 20 lb/ft mark.
You then take the wrench and angle it so you can get the 15mm socket around the bolt which has been threaded in by hand. Now go clockwise to tighten and tighten the bolt till it, beeps, clicks, bumps, jumps, or yells. (whatever noise or sound your torque wrench makes) If it makes any of those noises you are done, no more tightening of the bolt is needed.
10-20-2010, 06:18 PM
#122
Staging Lane
Thread Starter
n whts up with tha guy makin fun of my forum name? coolstarrybra... stay tha *** out if u cant help me...
so i got all the oil in... moment of truth 2 see if she purrs right...
no1 answered me tho, should i use a TQwrench on the oilbolt to keep it from fallin out? or will it be fine if i use my fingers
10-20-2010, 06:20 PM
#125
Registered User
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
And I might be from the internet's **** hole but it smells way better than LS1tech and its way more interesting. Why dont you just drive your HurrMaro off a cliff.
10-20-2010, 06:20 PM
#126
sry, im typin on my phone a lot. i kno how to speak n spell.
n whts up with tha guy makin fun of my forum name? coolstarrybra... stay tha *** out if u cant help me...
so i got all the oil in... moment of truth 2 see if she purrs right...
no1 answered me tho, should i use a TQwrench on the oilbolt to keep it from fallin out? or will it be fine if i use my fingers
n whts up with tha guy makin fun of my forum name? coolstarrybra... stay tha *** out if u cant help me...
so i got all the oil in... moment of truth 2 see if she purrs right...
no1 answered me tho, should i use a TQwrench on the oilbolt to keep it from fallin out? or will it be fine if i use my fingers
10-20-2010, 06:21 PM
#127
11 Second Club
iTrader: (26)
Join Date: Oct 2006
Location: S.W. Missouri
Posts: 2,140
Likes: 0
Received 0 Likes
on
0 Posts
sry, im typin on my phone a lot. i kno how to speak n spell.
n whts up with tha guy makin fun of my forum name? coolstarrybra... stay tha *** out if u cant help me...
so i got all the oil in... moment of truth 2 see if she purrs right...
no1 answered me tho, should i use a TQwrench on the oilbolt to keep it from fallin out? or will it be fine if i use my fingers
n whts up with tha guy makin fun of my forum name? coolstarrybra... stay tha *** out if u cant help me...
so i got all the oil in... moment of truth 2 see if she purrs right...
no1 answered me tho, should i use a TQwrench on the oilbolt to keep it from fallin out? or will it be fine if i use my fingers
10-20-2010, 06:22 PM
#128
Staging Lane
Thread Starter
GUYS THAT SOUND IS STILL THER.
it started this mrnin real quiet but it sounds like a bunch of marbels fell into my throttle body n r hitting **** or somethin... she aint purrin right...
Wht do i do?? should i drive on her to c if tha sound goes away when all my mobile1 gets all mixed into tha engine parts?
it started this mrnin real quiet but it sounds like a bunch of marbels fell into my throttle body n r hitting **** or somethin... she aint purrin right...
Wht do i do?? should i drive on her to c if tha sound goes away when all my mobile1 gets all mixed into tha engine parts?
10-20-2010, 06:23 PM
#130
TECH Fanatic
Join Date: Jan 2010
Location: Euless Tx
Posts: 1,219
Likes: 0
Received 0 Likes
on
0 Posts
This jerkoff 
10-20-2010, 06:24 PM
#132
GUYS THAT SOUND IS STILL THER.
it started this mrnin real quiet but it sounds like a bunch of marbels fell into my throttle body n r hitting **** or somethin... she aint purrin right...
Wht do i do?? should i drive on her to c if tha sound goes away when all my mobile1 gets all mixed into tha engine parts?
it started this mrnin real quiet but it sounds like a bunch of marbels fell into my throttle body n r hitting **** or somethin... she aint purrin right...
Wht do i do?? should i drive on her to c if tha sound goes away when all my mobile1 gets all mixed into tha engine parts?
let it idle for a minute, if this does not fix it, then you need to take it to a shop. Although you don't trust them, right now I would not trust your work, just being honest man.
10-20-2010, 06:25 PM
#133
Staging Lane
Thread Starter
GUYS HELP... imma lettin the 5W30 get all mixed in n **** n the sound is still there. so i added the rest of my QTbttle n it helped a little.
Wht should i add to make this noise go away? its fukin annoyin...
Wht should i add to make this noise go away? its fukin annoyin...
10-20-2010, 06:25 PM
#134
Staging Lane
Thread Starter
GUYS HELP... imma lettin the 5W30 get all mixed in n **** n the sound is still there. so i added the rest of my QTbttle n it helped a little.
Wht should i add to make this noise go away? its fukin annoyin...
Wht should i add to make this noise go away? its fukin annoyin...
10-20-2010, 06:27 PM
#135
TECH Regular
Join Date: Jun 2008
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
What exactly do you drive?
I also don't go online to try and look cool...
Maybe you should get out more slugger.
10-20-2010, 06:32 PM
#137
Registered User
Join Date: Oct 2010
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
10-20-2010, 06:34 PM
#138
Staging Lane
Thread Starter
tht noise isn't goin away, i think maybe i need to rev her up n get the 5W30 mixed in btter. Imma take her around tha block n let it all get mixed in.
yall r real paschent for helpin me with this. i appreciat it, even if yall do hate on 13sec imports...
yall r real paschent for helpin me with this. i appreciat it, even if yall do hate on 13sec imports...
10-20-2010, 06:35 PM
#140
Teching In
Join Date: Sep 2010
Location: Ft.Lauderdale, FL
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Did you mix the first 2 quarts with gasoline? If you didnt, thats your problem. Whenever you do an oil change to an LS1, you need to mix the first two quarts with gasoline to make the oil thicker. Everbody knows this.