ms3 tune hp numbers???
 

Hey wussup guys im getting my car tuned thursday mods are 99 camaro ss 6spd, ms3 cam, ls6 intake, double roller, springs, pushrods, walbro 255, longtube headers, o/r y pipe, slp exhaust, 3.73 gears, 100shot nitrous. Does anybody have a ball park idea of what power i will make off of the nitrous. Thanks

stock heads? 853's? non ported and depends on the dyno really as well..dynojet etc..

Stock heads for now i have a set of 243's but they are getting ported right now so they wont be on the car for the tune. It wilk be on a dynojet

This is a local guy from my area

http://www.youtube.com/watch?v=a_GZs...layer_embedded

Pretty much he has a 9", MS3, and Bolt-ons. Made 404WHP.

what intake did he have. and did he have a u/d pulley ???

i'd have to agree, good tune with the stock heads you'll prolly be around the 400whp mark. i've seen a good many cars with some nice heads and that cam push anywhere between 425-450rwhp with similar mods

Whats the point of a dyno tune before you put the heads on? You'll just have to retune after. :confused:

i made 390 at wheels thru 4.10s and a crappy flowmaster. i would have made 400 if it was a cooler day and thru the cut out. im a m6 and had stock 853 and had a u/d pulley

@ ls199camaroz28: im getting it tuned now without the heads because im not putting them on right away there off getting ported and i want to see the diffrence they make number wise after cam only.

@00camaross: i hope i can touch 390 i really kicked myself in the ass for not getting a u/d pulley.

Well my tune is thursday morning I will post up the numbers all motor and if i decide to spray the 100 shot i will post those number too.

Good luck..Post up some numbers and lets see how she does..

ya keep us updated. I too am a m6 car looking to go cam package this week. people pushing me to ms3 but soo many damn choices. Im a bolt on car with fab 9" and suspension running high 11.s. Looking to be low 11`s so I can compete in 11.0 class

Thanks guys. I should have some numbers up tommor
ow when it gets done and the graph hope it goes good.

hey wussup guys got my car tuned today final numbers were 385hp and 376 tq. What do you guys think.

Seems a little low

Yea my tuner says his dyno reads lower than others and if i get it dynoed somewhere else i should touch 400rwhp