EPS 234/246 with L92 heads
07-21-2011, 12:57 PM
#1
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Jun 2005
Location: Akron OH
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
EPS 234/246 with L92 heads I have a stock bottom LQ9 i'm putting together and was planning on using my 243s but they need some work so i would rather just upgrade to L92's.
Has anyone used the EPS 234/246 .602/.607 111LSA cam along with a set of L92 heads? it seems to me like it would work good with the decent split. I already have the cam and would rather not have to purchase another one.
any similar builds out there?
Has anyone used the EPS 234/246 .602/.607 111LSA cam along with a set of L92 heads? it seems to me like it would work good with the decent split. I already have the cam and would rather not have to purchase another one.
any similar builds out there?
07-21-2011, 05:35 PM
#3
TECH Regular
Join Date: Dec 2003
Location: Cherry Hill, New Jersey State
Posts: 486
Received 0 Likes
on
0 Posts
The overlap of this cam is over +17 degree, which you will have a big hickup or surging at the low rpm speed. The L92 do not require that big overlap, and according to alot of threads, the overlap shall not be more than 6 degree and best is lower than or equal to +3.
