Bad cam eats lifter, need help choosing new cam!
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 2001 Corvette Z06 and recently had a bad aftermarket cam mess up a lifter. I don't know how the cam would be bad but that is what I was told (heat treat or something). So I'm installing new LS7 lifters and now I'm trying to decide on a new cam. I have full bolt ons, headers, catless x-pipe, Ti catback, vortex ram air intake and underdrive pulley.
I would like to make power close to the 420 mark which shouldn't be too difficult since I have the LS6 heads and intake manifold. As far as driveability, it's not my DD but I would still like it to be tolerable, I don't mind if it shakes at idle. I do like the sound of a mean idle with a nice lope.
My main concern is the powerband. I don't want to rev the car to 7000 rpm to get to the power.
I've been looking at cams from TSP because they seem to be within my budget. I really don't have any specific cam in mind so any suggestions would be great!
Btw, heads are stock LS6 and I don't want to flycut them or modify them.
Thanks for the help![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Adham
I would like to make power close to the 420 mark which shouldn't be too difficult since I have the LS6 heads and intake manifold. As far as driveability, it's not my DD but I would still like it to be tolerable, I don't mind if it shakes at idle. I do like the sound of a mean idle with a nice lope.
My main concern is the powerband. I don't want to rev the car to 7000 rpm to get to the power.
I've been looking at cams from TSP because they seem to be within my budget. I really don't have any specific cam in mind so any suggestions would be great!
Btw, heads are stock LS6 and I don't want to flycut them or modify them.
Thanks for the help
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Adham
#6
TECH Enthusiast
iTrader: (7)
Join Date: Jun 2010
Location: IL
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
With your stock heads the TSP 228r 112 LSA would work nicely. Great power all throughout the powerband without having to rev it sky high. Great drivability, easy to tune, mean choppy sounding idle on the 112LSA.
Trending Topics
#12
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not too familiar with the cam sizes, duration and lift etc....can you tell me which number is what? For example, if there is a 232/234 .595"/.598" cam, which number identifies the duration, the lift, etc?
Thanks again
#13
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well, I hate to dog on Comp because they are a super high volume joint. Of course they are gonna have some failures based on the sheer volume they produce on a daily basis. But that is one reason I chose a Cam Motion grind (they grind their cams in house), it was recommended to me by some LS geared vendors that Comp's QC had gone down the *******.
#17
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok, I'm thinking of choosing one of the two cams:
TSP 233/239 .595"/.603"
or
TSP Torquer V2 232/234 .595"/.598"
both on a 112 LSA
I want to go a little bigger than a 228 because that's what the previous owner said is in the car right and I think I'd like a bit more.
TSP 233/239 .595"/.603"
or
TSP Torquer V2 232/234 .595"/.598"
both on a 112 LSA
I want to go a little bigger than a 228 because that's what the previous owner said is in the car right and I think I'd like a bit more.