need help finding a few bolt spec's
 

ive searched on here and google and can not seem to find the bolts i need
so was wondering if some 1 could help me out

my car is a 2000 transam auto
i need to know the specs of the following bolts

-torque converter bolts the 3 small ones that bolt to the flexplate
-transmission crossmember bolts
-transmission mount nut
-transmission bellhousing bolts
-ac pump bolts

it would be greatly appreciated if some 1 could help me out with this thank you

Torque converter to flywhel bolts- 46 Ft/lbs
AC compressor pump bolt/bracket - 50Nm
Trans mount bolt - 38ft/lbs Trans nut 77 Ft/lbs
trans support bolt 66 ft/lbs

pulled those from alldatapro, i dont have my haynes manual at the moment

hope this helps

that does help but i was meaning the bolt sizes like how long and thread pitch and stuff

nobody knows these bolt sizes ?

well after several hours under my car trying to put the transmission back in with a hand full of bolts and washer i figured it out thanks thanks -_-

thank u sir =]

still couldnt find them ? i only need the specs now on the ac bolts