Help with my build direction... Sold the 5.3 I had, now i have a 6.0 Lq4. Here is what I have: LQ4 Shortblock (fresh) 5.3 heads (will have 2" valves cut and installed with some mild port work) LS6 springs LS1 intake (It's what I got, and I cant afford much else) Truck TB ported truck 85mm MAF 1 3/4" MAC long tubes for Mustang with LS flanges and full 3" MAC catback with X-pipe I need nice street manners. I want daily driver abilities with this car. I need a cam that will provide that, and sound good too. Going 4L80e with stock convertor (till funds arrive) 3.73 gears. What do I need to look for? Charlie |
I dot think a 4l80 is nessesary as you are working with stock power levels, that big Trans will have more parasitic losses than a 4l60... But if that's what you got you'll be fine... As far as cam I would go in the low to mid 230s in duration but stay under .600" on the lift bc those stock heads won't flow past that...good luck man! |
All times are GMT -5. The time now is 03:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands