Silver_Bullet_Z28

hey guys, i have a 2000 z28 with a 224/228 .581 .588 112lsa cam (with rods and springs of coarse), 373 gears, ls6 intake, and other bolt ons and i was wondering if i have/need to get a bigger cam for the new heads...i have a pair of 241 heads in a box that im gonna get ported, polished, milled, valve job, full 9 yards to replace my stock 853s along with some LS7 lifters and 42lbs injectors...sound good or is cam gonna be too small for that setup?

99Bluz28

iTrader: (35)

That cam will only perform better with higher flowing/higher compression heads.
IMO, stick with it!

mac62989

iTrader: (1)

If you get the compression up, that combo will make some killer torque/useable power. Id say stick with it and have fun. Might not be king of the dyno but it will be fun on the street.