sick_0n3

iTrader: (7)

Looking for thought on Livernois Stage 3s vs AI ( Advanced Induction ) 226s. Not looking for the usual bs of this company or that company because of name, looking for solid thoughts with experience on them to back it.

Will be going in a M6 stock bottom end 346 with a TSP 233/239 .595/.605 112LSA with full bolt ons.

HeavyMetl

iTrader: (2)

I went with AI226 243's. 347 LS1, FAST 102, AI 236/242 cam.

My car has been a best of 11.26@122.8 with a T56, but admittedly I've been doing the tuning myself and am still learning.

mchicia1

iTrader: (5)

The AI heads are really good and priced well. Good customer service too, even if it is all email based.

Rise of the Phoenix

iTrader: (27)

https://ls1tech.com/forums/multimedi...tml?styleid=26

https://ls1tech.com/forums/dynamomet...tml?styleid=26

https://ls1tech.com/forums/dynamomet...tml?styleid=26

As you can see, either head is a great option.

garygnu

what are the valve size of the stage 3 head ?if too big and too close to the cylinder wall ,it can hurt port flow .

JakeFusion

iTrader: (7)

I believe they use a lightweight 2.02/1.575 combo in the Stage 3... but will go upto a 2.08/1.60 depending on the bore you put in there.

Ai can put whatever valves you want in there as well.

TXZ28LS1

iTrader: (5)

I'm going to run livernois stage 3 ls6 head and that 233/239 cam as well.