4.8 cam recomendation needed
#1
Teching In
Thread Starter
Join Date: Apr 2014
Location: Bakersfield CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
4.8 cam recomendation needed
Going to put my 4.8 gen III into a 3500 lbs. '66 Buick skylark. The car will be street driven. Will have a stock 350 turbo and converter, shorty headers going into 2 1/4 dual exhaust with flowmasters. Have a msd 6010 and edelbrock performer dual plane intake and edelbrock 600 4bbl carb. Hoping to get the car to rev to 6000 rpm and be able to smoke the tires. Would also like to hear the cam but not mandatory, any recommendations? Hoping to get part numbers etc. as I'm not real good at understanding all the numbers and what they will do however I was considering possibly a used ls6 can and springs. Is this a good option for the money or would I see much better results with a different cam and springs?
Last edited by 66gmcfleetside; 09-19-2015 at 12:31 PM. Reason: More accurate title