Identify these as comp 918's and pushrods? Or stock?
 

Found these from last year, not sure if they are comp 918 and hardened pushrods or the stock ones. I was 99% sure I threw away the stock ones, but wanted to verify here with pics before I sold them.

Notice the red stripe on the springs and ball on each end of the pushrods.

Pics are below:

https://cimg5.ibsrv.net/gimg/ls1tech...3d187031bf.jpg


https://cimg6.ibsrv.net/gimg/ls1tech...3572c3a5fd.jpg


https://cimg7.ibsrv.net/gimg/ls1tech...770e1fd99c.jpg


https://cimg8.ibsrv.net/gimg/ls1tech...1ad884abb9.jpg


https://cimg9.ibsrv.net/gimg/ls1tech...b24a0d7aa2.jpg


https://cimg0.ibsrv.net/gimg/ls1tech...46e33c3789.jpg


https://cimg1.ibsrv.net/gimg/ls1tech...4f20ecc793.jpg

Hard to tell on the springs but are not Comp 918's beehive. Can't quite tell with the ones in the picture. The after market pushrods I have seen all have had some type of lazer etching on them denoting who made or sold them.

Looks like stock stuff to me.

those are stock springs and rods.

Thanks for help guys I'll toss these babies in the trash lol