Cam/valve spring compatibility question - Custom grind cam/pac-1904
02-07-2016, 02:46 PM
#1
Staging Lane
Thread Starter
Join Date: Jan 2009
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Cam/valve spring compatibility question - Custom grind cam/pac-1904 I've been reading up & I think they'll be fine for my cam but I just wanted to get people that are better versed in valve train than I before I purchased.
My cam specs are: 230/234 .600”/.602” 114LSA (comp eps lobes)
pushrods: 7.425" comp cam rods
rockers: harland sharp 1.7 non adjustable
1 of my valve springs broke (dual) so I'm looking to replace em all. (miles on current springs unknown, i didnt jot down the mileage. its not a daily, its just a weekend toy car & they've been in for about 4 + years)
Will PAC-1904's be fine (0.625" max lift per PAC site)
http://www.racingsprings.com/LS-Engi...KS15/Item/1703
My cam specs are: 230/234 .600”/.602” 114LSA (comp eps lobes)
pushrods: 7.425" comp cam rods
rockers: harland sharp 1.7 non adjustable
1 of my valve springs broke (dual) so I'm looking to replace em all. (miles on current springs unknown, i didnt jot down the mileage. its not a daily, its just a weekend toy car & they've been in for about 4 + years)
Will PAC-1904's be fine (0.625" max lift per PAC site)
http://www.racingsprings.com/LS-Engi...KS15/Item/1703
02-07-2016, 08:51 PM
#2
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,836 Likes
on
1,145 Posts
I would call Brian tooley and see what he recommends personally