booboo37

iTrader: (43)

The cam is a 2010 6.2 ls3 cam and doesn't have the reluctor ring on it for the cam sensor to read. My question is can I jump the wires together so it will run right and not use the sensor or do I have to change the cam. The new motor is a 6.0 with that cam and 799 heads.... The motor that was in the Tahoe was a 5.3...

svslow

You would need to run an LS2 style front cover/cam sensor with the 1X cam sprocket.

booboo37

iTrader: (43)

The cam sensor is in the back.....

booboo37

iTrader: (43)

Heres the new rebuilt 6.0 motor with the cam sensor in the back....and if it has a Ls3 cam then he has the wrong front cover right..??...The Tahoe had a 5.3 motor......... not mine just trying to help...

KCS

iTrader: (20)

You don't have to use it....

How do you think people put Gen IV engines in Gen III vehicles? Use the LS2 front cover and timing set, get the extension harness, and plug it in to the front cam sensor.

booboo37

iTrader: (43)

Ya so he needs this cover and the right gear on the cam and a extension for the harness..right.. ?