LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Generation III Internal Engine (https://ls1tech.com/forums/generation-iii-internal-engine-5/)
-   -   H/C package=485hp ??Q's?? (https://ls1tech.com/forums/generation-iii-internal-engine/188372-h-c-package-485hp-qs.html)

LS1SS4ever Jul 1, 2004 09:38 AM

H/C package=485hp ??Q's??
 
I saw it in slponline.com and it cost $2595. is 485hp with stock engine? if is it I see it is worth money..........

cyphur Jul 1, 2004 09:40 AM

If you want a badass h/c package, and are willing to pay for it, call MTI, or Thunder Racing, or TSP. They will set you up with a package far nicer then anything SLP has. Just my .02.

Jason 98 TA Jul 1, 2004 09:48 AM

We offer complete ls6 based heads cam packages for around 2150 :) If you get a h/c package based off the 5.3l style head you could be out the door for under 1800 or so :)

Ragtop 99 Jul 1, 2004 11:02 AM

That is not going to be 485 RWHP horsepower. Don't confuse that with other HP ratings you see on this site that are measured in RWHP. Do a lot more reading here, visit some of the sponsor sites, and make sure the H&C packages are comparable and the cam choice meets your goals.

F1_SS Jul 1, 2004 11:06 AM

Knowing SLP its 485hp at the flywheel, just like they said the 345hp camaro and firehawk, some only make 325 or so

PongoX11 Jul 1, 2004 12:55 PM

HA, Knowing SLP its 485hp before the flywheel :secret:

technical Jul 1, 2004 01:51 PM


Originally Posted by LS1SS4ever
I saw it in slponline.com and it cost $2595. is 485hp with stock engine? if is it I see it is worth money..........

I confused... :confused:
Isn't that an LT1 in your sig?
Do you own an LS1?

JZ'sTA Jul 1, 2004 03:36 PM

Damn now I am confused as well.
Dont believe what SLP says. You will never see that kind of HP with that package unless you take the moror out of the car and then you will be lucky.
Check out some sponsors right here -------------------------------->>>>>>>>>

jrp Jul 1, 2004 04:40 PM


Originally Posted by Ragtop 99
That is not going to be 485 RWHP horsepower. Don't confuse that with other HP ratings you see on this site that are measured in RWHP. Do a lot more reading here, visit some of the sponsor sites, and make sure the H&C packages are comparable and the cam choice meets your goals.


:werd:

cz2898 Jul 1, 2004 11:27 PM

SLP has a lot of good stuff but im going to have to agree that you would be lucky to get 485 to the flywheel, from doing searches around here.

LS1SS4ever Jul 4, 2004 04:39 AM


Originally Posted by Ragtop 99
That is not going to be 485 RWHP horsepower. Don't confuse that with other HP ratings you see on this site that are measured in RWHP. Do a lot more reading here, visit some of the sponsor sites, and make sure the H&C packages are comparable and the cam choice meets your goals.

So the culcalusion will be like this 485x.85= 412 hp on the road. Is it right?

jrp Jul 4, 2004 05:02 AM


Originally Posted by LS1SS4ever
So the culcalusion will be like this 485x.85= 412 hp on the road. Is it right?

approximate: depending on tranny, gears, bolt ons, ect.

one of the few people here that has that package put down 409rwhp IIRC

mikey Jul 4, 2004 08:01 AM

We have a top end package that did 502 rwhp / 437 lbs/ft rwtq with full exhaust and all belts.

Rookie Jul 4, 2004 07:48 PM


Originally Posted by mikey
We have a top end package that did 502 rwhp / 437 lbs/ft rwtq with full exhaust and all belts.

On a 346? Hyd roller cam? That rocks! :hail:

cz2898 Jul 5, 2004 11:50 PM

what kit is that

BOWTIE Jul 6, 2004 02:04 AM


Originally Posted by mikey
We have a top end package that did 502 rwhp / 437 lbs/ft rwtq with full exhaust and all belts.

Ditto, what package would that be? Spill the details.

SNAKSLYR Jul 6, 2004 05:32 AM

http://www.rapidmotorsports.com/mode...=2&intYearId=3

Here ya go. Very nice!

Ragtop 99 Jul 6, 2004 03:35 PM

That's a pretty stout package. :hail:

Ryan02SS Jul 6, 2004 03:41 PM

Mikey knows his Shit! Rapid all the way!

2001CamaroGuy Jul 6, 2004 04:44 PM


Originally Posted by PongoX11
HA, Knowing SLP its 485hp before the flywheel :secret:

:jest: ......yep......


All times are GMT -5. The time now is 08:11 PM.


© 2026 MH Sub I, LLC dba Internet Brands