LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Generation III Internal Engine (https://ls1tech.com/forums/generation-iii-internal-engine-5/)
-   -   Cam dilemma? (https://ls1tech.com/forums/generation-iii-internal-engine/246000-cam-dilemma.html)

Dustin 98TA 12-04-2004 06:42 PM
Cam dilemma?
 
I want to swap my cam(TR224) for something bigger, ive been looking at the FM14, but I dont believe it will work with my setup. My heads have been ported, shaved .030", and have 2.055 intake valves. I believe I will have P/V clearance problems.
Anyone have any ideas if this will work or can give me some ideas of different cams I can run?

99ZEOD 12-04-2004 07:21 PM
I would call FMS and get their advice. Allan will definitely be a big help.

pdd 12-04-2004 07:23 PM
Originally Posted by Dustin 98TA
I want to swap my cam(TR224) for something bigger, ive been looking at the FM14, but I dont believe it will work with my setup. My heads have been ported, shaved .030", and have 2.055 intake valves. I believe I will have P/V clearance problems.
Anyone have any ideas if this will work or can give me some ideas of different cams I can run?
my heads are milled .024 and i have 2.05intake valves. im going with the FM14. im going to flycut the slugs. i did measure the fm11 thats in my car now on a 114lsa and i had plenty of room


All times are GMT -5. The time now is 03:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands