228/230/571/573 Xer Wondering who is running one? I am going to on a 112 due to the recommendation of Brent @TEA along w/ their 5.3 1.5 heads milled at 0.01. It is going to be coupled with a 4200/2.35 stall, 373's, Fast 90 Intake, NW TB, TSP 85 mm lid, SLP 85 mm MAF, Kooks 1 3/4 headers and Y Pipe, and the rest of the boltons in my sig. Just wondering what everyone thinks of the cam. |
The 571/573 sound like the XE lobe, not the XE-R. The XE-R has .588/.592 valve lift. |
Possibly. That would idle like the stock cam with cutouts, doesn't it??? |
It says XR on the cam card. |
there are xr and xer lobes. |
It is just the extreme lobe, I misspoke. |
This cam has been one of the top performers with our heads on our dyno. |
That is a good cam but the lobes are XE not XER. See sig below. Neither the XE or the XER idle anything like stock. |
Originally Posted by 98t56TA Possibly. That would idle like the stock cam with cutouts, doesn't it??? |
All times are GMT -5. The time now is 04:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands