Z'mnypit

iTrader: (58)

Can anyone tell me where the cheapest place is to buy stock oem lifters? On GMpartsdirect.com there $23.53 a piece. Thats insane! They dont have to be GM but any OEM replacement will work.

Thanks in advance,
Vann

BigBlockChev572

iTrader: (7)

WHAT!? $23, that's a steal!! I bought one from a dealership today, over $50 with tax

Nate_Taufer

iTrader: (1)

I have a bunch of extras laying around. How many do you need? Just pm me and i'll give you a price. I have a few extra (8) from a 408 where a guy decided to go solid roller so they have very little run time (maybe 100 miles or less). Just let me know what you need.

Nate

SDB

iTrader: (7)

get some Comp-R's for about $200 shipped at any vendor.

REDWS6ROCKET

iTrader: (4)

i got comp oe's from tsp for $200 shipped. highly recommend them.

gomer

iTrader: (13)

Hey man, I have a few stockers laying around if you need them. Just PM me and let me know. I usually use the comp stock replacement ones for $200 set if someone is wanting new ones.

racecar

I will have a set of Comp R for sale soon, they are too noisy for me.
I stepped up to Morel, they are $$ but it will be worth it to quiet down the valve train.

Z'mnypit

iTrader: (58)

Im trying to stay away from the comps, Ive read to many complaints about them. I actually need all 16 of them. Im not going to do one or two. I have both heads off so I might as well do them all. Thanks for all the quick responses.

Gomer- You have 16?

REDWS6ROCKET

iTrader: (4)

i just noticed that you switched over to the FM 13 and LS6 heads. how do you like that combination.

Z'mnypit

iTrader: (58)

I drove it for about 5mins the other day & it pulled like a freight train. I havent started tunning on it much though, because of the lifters so I pulled the heads back off yesterday. Once I get everything settled in Ill keep you updated.

JZ'sTA

iTrader: (23)

What is wrong with the current lifters?

Z'mnypit

iTrader: (58)

They were starting to tick & I also had one get stuck, Causing the valve to hit the piston. I dont want to just replace one so while I have the heads off just to ease my mind. Im going to swap them all. Well before I buy new ones, how easily should they be to compress? What I mean is I can take one of my stock pushrods & try to push in on the lifter & it doesnt move. I can take the brand new one I have & do the same & it will compress easily. I may be wrong but this is why I made the assumption that I need to replace them all. BTW the new one was full of oil & would still eaisly compress.

Lasershop

iTrader: (2)

How much are the Morel's and do you still need adjustable rockers?

TT_Vert

iTrader: (12)

ill sell you my 20k oem ones w/ no wear for 50 shipped if interested. I got some new 850s when i went w/ a new cam and had some noise. turned out to be rod bearings.

dave