What's connected to the backside passenger head.
 

I just finished a head cam swap on my car which took forever and when putting it back together I was really tired and I'm thinking a missed a ground lug on the passenger side rear cylinder head.

My question is what is bolted to the backside of the passenger side cylinder head on a 2002 Camaro Z28 A4? What I have connected is the automatic transmission tube support and a harness clip. Did I miss anything?

Thanks for the help.

There's nothing there on mine. There are 3 or 4 grounds on the driver's side head though.

My 02 M6 only has a support for a wire harness on back of the PS head.

Mine also had the support for the harness.

nothing but the tranny dipstick over here...

Thanks for the replies. The car isn't running right and I pulled an all nighter finishing it and I was so tired I couldn't remember.

There is nothing connected but the transmission dipstick tube and the harness thing you mentioned.

my 2001 had a ground bolted down on it, that was it.