New aluminum intake from "Lingenfelter/Weiand"
12-02-2001, 10:57 AM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Normal, Illinois
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
New aluminum intake from "Lingenfelter/Weiand" I saw a new intake at the PRI show. It had Lingenfelter and weiands name stamped on the top. It is a nice piece. I am wondering if this is the one that Holley is working on.
12-03-2001, 12:34 AM
#2
Launching!
iTrader: (2)
Join Date: Nov 2001
Location: Brownsburg, Indiana
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Re: New aluminum intake from "Lingenfelter/Weiand" I talked to the Weiand rep at the PRI show. He said that the specs to those 2 intakes (1 was polished, 1 wasn't) are similar to the LS6 intake, but that since they're aluminum, they can be ported or port-matched to the heads to flow more.
Unfortunately, he WAS NOT aware that the '01-'02 LS1 F-bods do not have an EGR fitting in the intake. The Weiand pieces both had a big hole for the EGR fitting. He took some notes while we were talking & indicated that they will probably just fab up a block-off plate. Kind of makes me wonder though... I shouldn't have to tell them something like that! <img src="images/icons/shocked.gif" border="0">
Unfortunately, he WAS NOT aware that the '01-'02 LS1 F-bods do not have an EGR fitting in the intake. The Weiand pieces both had a big hole for the EGR fitting. He took some notes while we were talking & indicated that they will probably just fab up a block-off plate. Kind of makes me wonder though... I shouldn't have to tell them something like that! <img src="images/icons/shocked.gif" border="0">
12-04-2001, 11:05 AM
#3
TECH Enthusiast
Join Date: Nov 2001
Location: Milford, Ohio
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Re: New aluminum intake from "Lingenfelter/Weiand" [quote]Originally posted by Go4Broke:
<strong>I shouldn't have to tell them something like that! <img src="images/icons/shocked.gif" border="0"> </strong><hr></blockquote>
He was just a sales rep, I'm sure. I doubt this would be news to the engineering staff.
<strong>I shouldn't have to tell them something like that! <img src="images/icons/shocked.gif" border="0"> </strong><hr></blockquote>
He was just a sales rep, I'm sure. I doubt this would be news to the engineering staff.
