Hotcam/macs First Dyno #'s for me...
02-10-2002, 04:52 PM
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: ArKanSas, LR
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Hotcam/macs First Dyno #'s for me... Im running STOCK computer tuning as far as fuel and timing goes. I do however have limiters and grear ratio set. Running 4.10's and Stock MAF im impressed. 02's were on the .900-9.20 rage throughout. 358.7RWHP/361RWTQ through cutout with ORP's. And 344.6/347tq throu Exaust (two bullits in home made y pipe after rear axle) Man i love that cutout!! lol
I know others have higher #'s but this is my car and im happy!!
Looking at the chart looks like Tq peak is @ 4300 rpm it goes over the 360 line @ 3950 and drops below it @ 4600rpm. Hp peak looks like anywhere from 5700-6200 basically a flat line. Crosses the 350 mark @ 5300 and stays above 350 till my 6400 limiter!!
So what do you think?? Not bad IMO! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
I know others have higher #'s but this is my car and im happy!!
Looking at the chart looks like Tq peak is @ 4300 rpm it goes over the 360 line @ 3950 and drops below it @ 4600rpm. Hp peak looks like anywhere from 5700-6200 basically a flat line. Crosses the 350 mark @ 5300 and stays above 350 till my 6400 limiter!!
So what do you think?? Not bad IMO! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
02-10-2002, 06:04 PM
#4
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: ArKanSas, LR
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hotcam/macs First Dyno #'s for me... I dont have hypertech so i cant help you. I used Street&performance here in LR. thy just set the RPM limiter to 6400 and Speed limiter to 255mph. Then gear setting to 4.10 and fan turn on a 180. Its was $270 though big rip off but that was when i first go the car so i didnt know better before the ls1.com and ls1tech.com days for me...
02-10-2002, 06:07 PM
#5
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Dec 2001
Location: ArKanSas, LR
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hotcam/macs First Dyno #'s for me... No rear end is next for me! Broken for the 4th time now!!!! Im SICK OF IT! dont know what to do because i dont have the $$ to spend on the BIG ones and dont plan on going in Debt to build this car. Only $2500 or less in the car now! Cant see another $2500 for a rear end. but looks like its my only way out. <img src="gr_sad.gif" border="0">
