LS1TECH - Camaro and Firebird Forum Discussion - Will prc springs work in trickflow heads?

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)

- Generation III Internal Engine (https://ls1tech.com/forums/generation-iii-internal-engine-5/)

- - Will prc springs work in trickflow heads? (https://ls1tech.com/forums/generation-iii-internal-engine/645050-will-prc-springs-work-trickflow-heads.html)

ss2000

01-22-2007 06:12 AM

Will prc springs work in trickflow heads?

I'm looking at getting the new tfs 215 heads, but the factory springs are good only for .600 lift. The prc .650 springs are the same installed height at 1.800. Will they work?

DONAIMIAN

01-22-2007 06:27 AM

They should drop right in. I would give TEA a call to make sure tho, they might be able to work something out and get them to you with the spring of your choice.

exSSer

01-22-2007 12:48 PM

Quote:

Originally Posted by ss2000

I'm looking at getting the new tfs 215 heads, but the factory springs are good only for .600 lift. The prc .650 springs are the same installed height at 1.800. Will they work?

I'd check those springs again. I have them, and my springs were rated to .660, and were the standard duals.

All times are GMT -5. The time now is 07:15 PM.