LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)

- Generation III Internal Engine (https://ls1tech.com/forums/generation-iii-internal-engine-5/)

- - Folks using Isky 295-D's (https://ls1tech.com/forums/generation-iii-internal-engine/69014-folks-using-isky-295-ds.html)

ABNRNGR (Aka Dean)

Nov 21, 2002 10:30 PM

Folks using Isky 295-D's

are you droping them in and going with 1.80 install or are you shiming to the recommended 1.775 install? Isky states that a 1.775 will get you a closed seat pressure of 135 and 360 open. Is this too much for a 560 or so lift? hammer, tr224 etc.thanks,Dean

ABNRNGR (Aka Dean)

Nov 22, 2002 08:02 AM

Re: Folks using Isky 295-D's

ttt

JS	Nov 22, 2002 08:46 AM

Re: Folks using Isky 295-D's

135 Seat is perfect,the spring will lose about 2 or 3lbs after being cycled.Make sure u buy ALL the required parts to run the ISKY springs...

JS

All times are GMT -5. The time now is 02:35 PM.