Who is running the R1 cam from MTI?
#2
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I used to. Don't know the exact dyno since my fuel system was not up to the task that day but it was certainly over 500 RWHP. I ran some 10.2-3s with that cam at 133 MPH or so.
My tuning was way off from a drivability standpoint (as in it was bone stock with only a raised idle.) It was OK even like that but with the proper tune it would be really good.
My tuning was way off from a drivability standpoint (as in it was bone stock with only a raised idle.) It was OK even like that but with the proper tune it would be really good.
#4
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Have it now -
Dynoed 495 RWHP through the M6 and 469 on the auto. In traffic/driving it is pretty tame. It originally needed some tuning, but was quite docile afterwards.
I am in the process of going over to a solid roller fairly soon, so I will be punting it shortly. But solid rollers are not for everyone.
Dynoed 495 RWHP through the M6 and 469 on the auto. In traffic/driving it is pretty tame. It originally needed some tuning, but was quite docile afterwards.
I am in the process of going over to a solid roller fairly soon, so I will be punting it shortly. But solid rollers are not for everyone.