put cam in, now sounds super charged
#22
TECH Enthusiast
iTrader: (2)
Originally Posted by ricernomore
the sound is all ways there at the same time. and i didnt change my pump or timing chain. but here is the thing its not coming from that area its coming from the back of the engine near the fire wall. and to me it sounds like its on the driver side mostly. and its just a torquer 2 from tsp
This is exactly what mine sounds like, only mine started before the cam swap and it's still ther after the cam swap. I hope you figure out what it is, because I bet its the same thing I have. I'll also bet it's unrelated to the cam, but I've been wrong before.
#23
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
well here is the deal the more i drive i think it was there before just not enough to be bothered. but when you cam it, the cam just mulitplies it to where it is very noticable. Im done worrying about it cause i have looked everything over two times and cant find anything so its obviously nothing serious. but if anyone does find the prob just post it. but thanks for everyone ideas
#24
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
ok i have been tuned, still didnt fix it. When i was getting tuned he cleared the codes, but they came back right away. so I swapped map sensors. It ran better but still whined and the idle kept changing but it ran good enough to get tuned. It stayed this way for about 80 miles and started kicking the map/baro code again. since then i have pulled my air system, checked intake manifold gaskets and all lines. the tcs light keeps coming on and off. now tell me if this sounds right, the only things i can think off that could be the problems are either when i put my now springs in i didnt seat some of the intake valve seals all the way down or i may need a vac canister. im completly lost. it wasnt there before i camed.
#25
TECH Resident
Join Date: Jul 2006
Location: North Dallas
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Mine makes the whine sound too. I am told that it is just the cam working the valve train and is more or less normal. I would say that is true because the car runs great and has never thrown a code since the tune.