valve spring compressor
#21
12 Second Club
iTrader: (27)
Join Date: Feb 2006
Location: Texas....thank God.
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you have the time to make one, be my guest. If you have the money to buy a name brand one, then, by all means proceed there also, but for some one trying to save a lil money and SUPPORT A SPONSOR, this is the way to go. Jesus, everyone is a critic....
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
or...You could just do as I did, look at the Crane tool, see how simple it is, go out to the shop, measure the angles from the rocker pad to the valve stem, step over to the mill and carve it out. Course not everyone has a mill in their shop or the time or desire to do it, lol.
Carl.
Carl.
#24
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I recently had to remove my springs....I made my own tool, just like the Crane one, except maybe a bit shittier looking.
Although how anyone manages to break the valve locks free from the retainer using only air, is beyond me !!!!!
Mine were stuck tight ! had to use the rope in the cylinder trick to stop the valves from moving to get the valve locks split.
Nightmare of a job.
Although how anyone manages to break the valve locks free from the retainer using only air, is beyond me !!!!!
Mine were stuck tight ! had to use the rope in the cylinder trick to stop the valves from moving to get the valve locks split.
Nightmare of a job.
#25
10 Second Club
iTrader: (3)
Join Date: Mar 2004
Location: orlando, fl
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
trick of the trade. before putting the valve spring compressor on, take a hammer and tap the retainers. this, usually, breaks the seal the locks have from the oil making them stick to the retainer.
#26
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Believe me, I was hammering too !!!!! even once I had the thing loaded up too with rope.. I was almost sure I bent a valve at one point it took that much effort to break some free. Luckily it didnt though.
No matter what, air alone was insufficient
No matter what, air alone was insufficient
#27
TECH Addict
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sometimes you get lucky and the locks come loose on their own. If not it helps to use the TDC method with compressed air. Installing the hose is certainly a lot easier than stuffing enough rope into the spark plug hole to fill the cylinder keeping the valves from falling as the springs are compressed. If you using compressed air and the locks are sticking you will know it as soon as you begin to compress the spring because you will actually hear the compressed air start to excape from the cylinder. You can give the retainer or valve spring a tap at this time. I use a brass mallet.