good street manner cams?
11-20-2007, 02:23 AM
#4
Launching!
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
dam even with the heads i wont make over 400hp, my headers are on the way, and i already have true duals, ls6 intake and port and polished TB.... come on i need to see 400hp
11-20-2007, 02:30 AM
#5
with the intake and longtubes, theres not way you won't hit 400, honestly, unless you pull a spark plug wire or something, i made that on a smaller cam with stock ls6 heads and blowmasters
Trending Topics
11-20-2007, 08:16 PM
#9
Mine made 395rwhp through an a4 unlocked stock converter with home ported stock heads and 226 cam on mickey thompson et radials... I'd say it's going to hit your 415-430 mark no problem.
11-20-2007, 09:19 PM
#11
TECH Addict
iTrader: (10)
Join Date: Jun 2004
Location: Commerce Twp, MI
Posts: 2,918
Likes: 0
Received 0 Likes
on
0 Posts
80+% of good cam manners or driveability is in the tune. If your tuner can't get a 22x/22x cam to drive smoothly from 1200rpm~redline, then I'd start looking for a new tuner.
11-20-2007, 09:58 PM
#12
Launching!
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, i still have a little while till i have the money for my setup...
but what are some supporting mods for H/C, (ported oil pump, new head bolts, etc.) any info on this would help
but what are some supporting mods for H/C, (ported oil pump, new head bolts, etc.) any info on this would help
11-20-2007, 10:12 PM
#13
TECH Apprentice
Join Date: Feb 2002
Location: Chicago; South Side
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
Comp Cams 224/224 here with a tune and full boltons. Car runs very smoothly including rush hour traffic with the air running full blast. I make 385 rwhp through a 12 bolt and 4.11's.
