3.185 stroke+6.500 rod=what piston??
#1
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
3.185 stroke+6.500 rod=what piston??
3.185 stroke
6.500 rod
some1 care to help me figure out a piston thats gonna work im tryin to keep from decking the block.................
6.500 rod
some1 care to help me figure out a piston thats gonna work im tryin to keep from decking the block.................
#4
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
je makes sum for a 4.125 bore there like $900+
but they have that compression height but there sbc pistons
would they work?
is compression height different than pin height??
but they have that compression height but there sbc pistons
would they work?
is compression height different than pin height??
#6
TECH Fanatic
Thread Starter
iTrader: (21)
Join Date: Jan 2008
Location: morristown/newport,tn
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
ok in a 4.030 bore with a compression height of 1.125 there are alot of sbc pistons with .927 wrist pins so i could just bore the 6.0block .030 and deck it .025 and these would work wouldnt they??