LS1LT1CAM

I am putting a .550 lift ls6 cam just wonder how close the piston to valve

I am putting a 5.3 in my car with a turbo

I am putting an ls6 cam in it and will check piston to valve but was wondering if this is even need to be done there are lots of people that have done this but can find anything about how close piston to valve is

Pwebbz28

iTrader: (31)

I had 5.3 heads on my ls1 milled .030 and used a .040 headgasket no problems at all with z06 cam

ZTwentyAteU

iTrader: (12)

you don't have a thing to worry about.