Anbbody USED The MS4 w/AFR 205cc Heads
#1
Teching In
Thread Starter
Join Date: Jun 2007
Location: Westport MA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Anbbody USED The MS4 w/AFR 205cc Heads
Hey Guys just wondering if anyone used that set up and what was your opinion of it cause i'm looking to get the AFR 205CC heads with the MS4 cam and run nitrous Just want to know what you exspirence was with them and your gains this is going on a stock LS1 bottom end I have LS6 intake manifold BBK 85mm throttle body SLP cold induction package header back exhuast..
Also would like to hear about the AFR 225cc heads...
Thanks Guys Appreciate the help
Also would like to hear about the AFR 225cc heads...
Thanks Guys Appreciate the help
#5
Trending Topics
#11
Teching In
Thread Starter
Join Date: Jun 2007
Location: Westport MA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
anybody else I'm gonna be ordering my stuff this week not sure if I want to get the AFR 205cc or 225cc anyone can help I will be running the 383 stroker kit
#13
11 Second Club
iTrader: (13)
MS4 + AFR 205 milled to 60cc + 150shot = SICK SETUP.
But since your on stock bottom you need a great tuner and you also need to flycut of course.
If you wanted 383ci then go with AFR 225 Tony Momo personal car made 530+rwhp
with custom grind cam by him and Ported 90/90 setup also ported by him.
But since your on stock bottom you need a great tuner and you also need to flycut of course.
If you wanted 383ci then go with AFR 225 Tony Momo personal car made 530+rwhp
with custom grind cam by him and Ported 90/90 setup also ported by him.
#14
Banned
iTrader: (1)
I think you're putting your definition of "driveability" in the mouth of the people who DO run that cam and call it "driveable." A cam with that much overlap is going to surge in a 346, I don't care who tunes it, it's not going to drive like stock. There are a lot of perspectives on "driveability" don't assume everyone means the same thing when they say it. To some, it's driveable if they can manage to get it down the street.
#17
TECH Addict
iTrader: (9)
I think you're putting your definition of "driveability" in the mouth of the people who DO run that cam and call it "driveable." A cam with that much overlap is going to surge in a 346, I don't care who tunes it, it's not going to drive like stock. There are a lot of perspectives on "driveability" don't assume everyone means the same thing when they say it. To some, it's driveable if they can manage to get it down the street.