90mm Street Warrior LS Intake?
#1
Teching In
Thread Starter
Join Date: Dec 2006
Location: kuwait
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
90mm Street Warrior LS Intake?
like the title say`s does anybody have any info about it or any results of hp gains ?
cause ive heard that is has been released and it costs 600 $
cause ive heard that is has been released and it costs 600 $
#5
TECH Addict
iTrader: (49)
Ha Ha...true. I've read several other post and the only things that are consistent are:
1. No one knows when it will be released
2. No one knows how much power it will make
3. But we will take your money for pre-orders
https://ls1tech.com/forums/generation-iii-external-engine/901842-new-weiand-intake-summer-street-warrior.html
https://ls1tech.com/forums/showthrea...43#post9713343
1. No one knows when it will be released
2. No one knows how much power it will make
3. But we will take your money for pre-orders
https://ls1tech.com/forums/generation-iii-external-engine/901842-new-weiand-intake-summer-street-warrior.html
https://ls1tech.com/forums/showthrea...43#post9713343
#7
11 Second Club
iTrader: (2)
http://www.speedinc.com/cont.cfm?cid=C0000807
Dont flame at this post, just take it with a grain of salt!
Trending Topics
#10
12 Second Club
iTrader: (1)
Join Date: Aug 2005
Location: Greenville, OH
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
While at the vette cruise in back in May I had an opportunity to take a tour of the Holley plant. I was told not to look for this intake to be out until September. This came from someone who has done some R&D on the intake. They are trying to tweek it a bit to compete better with the FAST. Right now the Weiand and FAST cross at about 5800 rpm, they are trying to extend that out a bit.
#12
10 Second Club
iTrader: (25)
Join Date: Feb 2004
Location: Canada
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
I highly doubt the FAST would go down in price either. Thats like saying the sheetmetal intakes will go down in price aswell.
They all have their niche. The Street Warrior is just that, a street peice, the FAST is the street/strip and the sheetmetal is strip..so to speak.
What I wanna see is how well a stock LS6 intake does against the Street Warrior. Which is only about 300$ for one of those.
So again it comes down to, if youre gonna nickle and dime ****, might aswell go with an LS6 intake as usual.
Otherwise if you want the most you can get, then you buy it once and do it right and get the FAST.
They all have their niche. The Street Warrior is just that, a street peice, the FAST is the street/strip and the sheetmetal is strip..so to speak.
What I wanna see is how well a stock LS6 intake does against the Street Warrior. Which is only about 300$ for one of those.
So again it comes down to, if youre gonna nickle and dime ****, might aswell go with an LS6 intake as usual.
Otherwise if you want the most you can get, then you buy it once and do it right and get the FAST.
#14
TECH Enthusiast
iTrader: (3)
Join Date: Jul 2005
Location: Tomball, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
I highly doubt the FAST would go down in price either. Thats like saying the sheetmetal intakes will go down in price aswell.
They all have their niche. The Street Warrior is just that, a street peice, the FAST is the street/strip and the sheetmetal is strip..so to speak.
What I wanna see is how well a stock LS6 intake does against the Street Warrior. Which is only about 300$ for one of those.
So again it comes down to, if youre gonna nickle and dime ****, might aswell go with an LS6 intake as usual.
Otherwise if you want the most you can get, then you buy it once and do it right and get the FAST.
They all have their niche. The Street Warrior is just that, a street peice, the FAST is the street/strip and the sheetmetal is strip..so to speak.
What I wanna see is how well a stock LS6 intake does against the Street Warrior. Which is only about 300$ for one of those.
So again it comes down to, if youre gonna nickle and dime ****, might aswell go with an LS6 intake as usual.
Otherwise if you want the most you can get, then you buy it once and do it right and get the FAST.
#17
TECH Fanatic
iTrader: (9)
Join Date: Nov 2006
Location: Fresno, California
Posts: 1,985
Likes: 0
Received 0 Likes
on
0 Posts
jesus Has the LS1 community become so disgusted with the way overpriced FAST that they are willing to sit and wait for something that may or may not be a competitor?
Well I am.
Hey FAST, IF this thing performs well, IF it ever is released...you are screwed.
Well I am.
Hey FAST, IF this thing performs well, IF it ever is released...you are screwed.
#20
UNDER PRESSURE MOD
iTrader: (19)
Remember when Proffesional Products started to hint about their new intake and how it was going to be a 90+mm and would be priced close to the same as the LS6???? Where is it now. I bet on this entire board less than 10 people are running it, guess why.
Until consumers get their hands on this, and we have reproducible results, all of this is pure speculation. It doesn't help that they have delayed the release multiple times either.
Until consumers get their hands on this, and we have reproducible results, all of this is pure speculation. It doesn't help that they have delayed the release multiple times either.