TSP Goes Back to Engine Dyno with Stock 346 LS1!
#1
TSP Goes Back to Engine Dyno with Stock 346 LS1!
Guys we're getting ready to go back to the dyno with a stock bottom-end engine for testing next week! We'll be testing 5 camshafts with different exhaust lobes on them & several different intake lobes including lobes built specifically for TSP!! Hopefully these custom lobes should help us raise the bar in camshaft development once again!
If you guys want to see some of these supposed supercams you've seen online feel free to shoot me a PM. If we have some extra time maybe I'll throw in some camshafts you guys would like to see tested!
We're looking to get some cylinder head, camshaft & ported intake test work done so we can continue to provide our customers with dead-on proven results, not guesstimates.
What I will promise you guys is we'll learn a lot of good information that will allow us to step up the performance once again in our latest camshafts!
Jason
Texas Speed & Performance
If you guys want to see some of these supposed supercams you've seen online feel free to shoot me a PM. If we have some extra time maybe I'll throw in some camshafts you guys would like to see tested!
We're looking to get some cylinder head, camshaft & ported intake test work done so we can continue to provide our customers with dead-on proven results, not guesstimates.
What I will promise you guys is we'll learn a lot of good information that will allow us to step up the performance once again in our latest camshafts!
Jason
Texas Speed & Performance
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#5
FormerVendor
iTrader: (18)
We will be posting results in public forums. We don't have a cam list yet. We are looking for some input on what cams you guys would like to see tested. We can't release the specs on exactly what new cams we will be testing just yet but should have them available in the coming weeks.
Jon
Jon
#6
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2005
Location: Denver International Airport, Colorado USA
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Jason & Jon:
I know you guys are going to get many requests.
Think a lot of us would like to see a cam 'comparable' to the quintessential "224".
Streetable, but great average HP/TQ over the curve.
Any way you can include a 'smaller' cam in with the big guys?
..WeathermanShawn..
I know you guys are going to get many requests.
Think a lot of us would like to see a cam 'comparable' to the quintessential "224".
Streetable, but great average HP/TQ over the curve.
Any way you can include a 'smaller' cam in with the big guys?
..WeathermanShawn..
Trending Topics
#12
TECH Resident
iTrader: (11)
Join Date: Jul 2004
Location: Boston
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
if anything it would be interesting to see a difference of lobes. same .050 duration numbers but different lobes to see how the lobes actually differ.
some of your shelf cams installed on different lsa and icl's. Dont care much to see specific cams or some other "insert cool name" cam. Just differences in something that can actully be considered on the technical side.
some of your shelf cams installed on different lsa and icl's. Dont care much to see specific cams or some other "insert cool name" cam. Just differences in something that can actully be considered on the technical side.
Last edited by ThirdGenLS1; 08-20-2008 at 05:48 PM.
#18