Gains from Stock LS3 intake porting
#1
Gains from Stock LS3 intake porting
I searched but couldn't find it. What type of gains have been seen if any from porting the stock LS3 intake? I found were the fast 102 only gained 3hp over stock. My application will be a 6.2 LS3 with a cam in the area of 229/236 620 lift.
#2
Im looking for some real data on this as well. Not just from the sponsors selling the service.
#4
LS1 Tech Administrator
iTrader: (14)
I lost power on two ported L76 intakes on my G8. Both were done by reputable sponsors. One intake lost 9rwhp and the other lost 3. I hate spending $300 and losing power. Buyer beware. Just because you get an intake ported by a well-known sponsor does not guarantee that it's going to gain you power. I dynoed before and after on the same dyno both times. The FAST 102 intake on the other hand, made nice gains over the stock and ported L76 intakes. Search my threads and you'll see it.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
#5
10 Second Club
iTrader: (1)
Join Date: Mar 2005
Location: Colorado
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
I lost power on two ported L76 intakes on my G8. Both were done by reputable sponsors. One intake lost 9rwhp and the other lost 3. I hate spending $300 and losing power. Buyer beware. Just because you get an intake ported by a well-known sponsor does not guarantee that it's going to gain you power. I dynoed before and after on the same dyno both times. The FAST 102 intake on the other hand, made nice gains over the stock and ported L76 intakes. Search my threads and you'll see it.
I'd mention names here, but at least one of them is a sponsor so I'll just say that you really need to do your homework before paying good money for intake porting. Also choose your tuner very carefully,,,,lots of horror stories there too! Feel free to PM me if you want names!
Jimbo
#6
So why did you switch from the L76 to the cathedril port setup? Do you happen to have any flow data on the new AFR 230V2 heads?
thanks,
Jiim
#7
LS1 Tech Administrator
iTrader: (14)
https://ls1tech.com/forums/generatio...ots-specs.html
https://ls1tech.com/forums/dynamomet...k-results.html
https://ls1tech.com/forums/generatio...automatic.html
https://ls1tech.com/forums/pontiac-g...mph-na-g8.html
And speaking about the L76 vs the FAST 102, here are the threads on that.
https://ls1tech.com/forums/generatio...t-6-0l-g8.html
https://ls1tech.com/forums/dynamomet...t-6-0l-g8.html
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Trending Topics
#9
TECH Junkie
iTrader: (9)
Ive yet to see one SINGLE dyno graph where porting the LS3 intake shows gains. I hear all sorts of claims but never any proof. Unless you want to count proof of LOSS of power as mentioned above
Mind you I seldom see much of any gains from the FAST on stock cubes either. on 427 builds then yeah its evident but stock 6.2L or smaller and not really. PatG clearly you gained but maybe its down to the tuning? As in your better equipped to get out of it what it has but not a lot of others that Ive seen have matched your success in that dept.
Mind you I seldom see much of any gains from the FAST on stock cubes either. on 427 builds then yeah its evident but stock 6.2L or smaller and not really. PatG clearly you gained but maybe its down to the tuning? As in your better equipped to get out of it what it has but not a lot of others that Ive seen have matched your success in that dept.
#10
TECH Junkie
iTrader: (2)
It's in here if you want to find it. We did a back to back never off the dyno intake swap going from an untounched L92 intake to one ported by Cory at LS2Portworks.
IIRC we picked up 8 or 9RWHP in the middle and it rolled over a little easier on top. You'll have to decide for yourself if it's worth it. I think it picked up a couple up top also.
https://ls1tech.com/forums/generatio...b-c-d-e-f.html
Last edited by WKMCD; 12-22-2010 at 05:45 PM.