MIAdragon

iTrader: (6)

This HAS to be fixed, any ideas??? Its toward the end of the video.

http://www.youtube.com/watch?v=yJiN7...ature=youtu.be

DietCoke

iTrader: (18)

dynamat. lmao.

that sucks.

Mike454SS

iTrader: (4)

Weld a tiny brace inside the plenum to stabilize the top?

...or put a soft rubber bumper on the hood to touch the intake just like your hand is touching it.

That'd drive me mental.

MIAdragon

iTrader: (6)

Yea, me too. I think the brace is what it needs its just going to mess up the powder.

DietCoke

iTrader: (18)

This may sound silly, but a limb saver might stop the noise (archery).

SSSTANG#1

iTrader: (14)

That's what I was thinking.

SSSTANG#1

iTrader: (14)

Can you hear it inside the car with the hood closed? What about at higher RPM?

MIAdragon

iTrader: (6)

Yes, not sure about high RPM's yet will find out tomorrow.

sselky66

KILLERARMY

Are you aware that the thread is 4yrs old?

eb110americana

iTrader: (4)

You might not even need to wrap the top of the intake in Dynamat, just a small square of the heavy stuff in the middle might be enough. This is often done from the factory with large expanses of flat sheet metal that have resonance issues.

pantera_efi

iTrader: (1)

HI ALL, most here now SOUND, possible NOT what creates that sound.

ALL here know what a speaker is, a Base Sub Woofer.

This is the poorly designed AL intake, one that "flexes" MAKING Sound Waves.

THIS item will crack/flex/fall apart.

Then your engine will "race".

Lance

stevieturbo

I just started mine with the POS Holley intake tonight...and holy **** it makes a hell of a noise !

Sounds even worse than the one in the video here !!

sselky66

Yes I know how old the thread is.....

KW Baraka

iTrader: (7)

.....and you actually expected a response?

KW

NSFW

Is it better to have two threads about the same problem?

sselky66

Ya he’s still a member right! So why wouldn’t i try and see what he did to fix the issue. That’s what the forums are for right?!?!.

stevieturbo

And it's still a valid problem today !

DietCoke

iTrader: (18)

Well unfortunately Mr. Beck isn't around to get it fixed, so.... either stiffen the vibrating plate or dampen it. Limb saver or dynamat or a strip of AL across the center spot.