Best heads to go with?
#1
Best heads to go with?
I have a 1999 Trans Am A4 the mods I have are SLP lid, chris1313 ram air kit, mild cam (218/227), 1 3/4 long tube headers to a 3 inch Y pipe. I plan on getting a LS6 intake and a 32-3600 stall, maybe a UD pulley. I was told 243 heads would be the best for my mods. What do you guys think?
#2
TECH Senior Member
Those, or 799's which are identical. Porting makes them even better, but stock is a great start.
#3
Yeah haven't decided on ported or just stock. Don't wanna push the limits to bad because I know the rear end get weak hopefully being an auto it'll be good then the transmission is what I'm worried about next
#4
TECH Senior Member
As many know, a properly ported head fattens up the curve all the way up and down, which makes driving a lot nicer. It will make whichever cam you use more effective. Stage I from TSP is only $750 plus parts.(usually valve springs if you need an upgrade).
#7
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes
on
1,145 Posts
Originally Posted by LS_Power
Yeah haven't decided on ported or just stock. Don't wanna push the limits to bad because I know the rear end get weak hopefully being an auto it'll be good then the transmission is what I'm worried about next
Trending Topics
#9
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes
on
1,145 Posts
A side question for the OP -- is it the VERY best heads or the best heads at xx price point?
On a 5.7, IMO the best is Mamo 220, Mamo 223 (TFS 220 casting plus Mamo lovin), mast small bore rectangle ports. But the price points may have you looking elsewhere.
Then you get to PRC, TEA, AI, Livernois, etc
On a 5.7, IMO the best is Mamo 220, Mamo 223 (TFS 220 casting plus Mamo lovin), mast small bore rectangle ports. But the price points may have you looking elsewhere.
Then you get to PRC, TEA, AI, Livernois, etc
#10
A side question for the OP -- is it the VERY best heads or the best heads at xx price point?
On a 5.7, IMO the best is Mamo 220, Mamo 223 (TFS 220 casting plus Mamo lovin), mast small bore rectangle ports. But the price points may have you looking elsewhere.
Then you get to PRC, TEA, AI, Livernois, etc
On a 5.7, IMO the best is Mamo 220, Mamo 223 (TFS 220 casting plus Mamo lovin), mast small bore rectangle ports. But the price points may have you looking elsewhere.
Then you get to PRC, TEA, AI, Livernois, etc
Just looking for the best heads for the money. Not really looking to spend 1000 dollars on a pair of heads. It's kinda a budget/mild build (why the cam is so small)
#12
#13
TEA and AI have great port programs for the 243. Just saying.
#14
TECH Senior Member