C6 Measurment please?
Thread Starter
Registered User
Joined: Nov 2007
Posts: 12
Likes: 0
From: Austintown, OH
C6 Measurment please? Anyone who has a C6 or access to the engine bay of one, I need the measurment from the center of the engine to the outside edge of the alternator. (closest to the body)
Reason why I ask. I'm considering doing a L92 heads / Ls7 intake swap on my Trailblazer SS as a winter project. With the current configuration of the front drive assc. I actually need to swap a bracket off of a C6 for the alternator and PS pump. I would just go with the L92 intake so I didn't need the bracket but the flow numbers on the L92 intakes are horrible.
270cfm (L92) compared to 330cfm (LS7), the heads I'm looking at getting can flow just over 330cfm.
Thanks to anyone who helps.
If there is an info anyone can offer on this swap onto an LS2 that also be apprciated.
Reason why I ask. I'm considering doing a L92 heads / Ls7 intake swap on my Trailblazer SS as a winter project. With the current configuration of the front drive assc. I actually need to swap a bracket off of a C6 for the alternator and PS pump. I would just go with the L92 intake so I didn't need the bracket but the flow numbers on the L92 intakes are horrible.
270cfm (L92) compared to 330cfm (LS7), the heads I'm looking at getting can flow just over 330cfm.
Thanks to anyone who helps.
If there is an info anyone can offer on this swap onto an LS2 that also be apprciated.
Last edited by S U VETTE; Nov 13, 2007 at 08:03 PM.
