help please
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
help please
i got a 6.0 370ci it has tsp ls6 head all arp bolt brand new cometic mls head gaskets arp head studs motor runs good but its building pressure in the radiator the car is not running hot i mean u can let it set for 2 or 3 days and go out ther crank the car and in a matter of seconds it will blow hoses no whater in oil so im lost done did all i no to do other than get some more haeds and try that can yall help thanks
#2
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
i got a 6.0 370ci it has tsp ls6 head all arp bolt brand new cometic mls head gaskets arp head studs motor runs good but its building pressure in the radiator the car is not running hot i mean u can let it set for 2 or 3 days and go out ther crank the car and in a matter of seconds it will blow hoses no whater in oil so im lost done did all i no to do other than get some more haeds and try that can yall help thanks
#4
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Looks like you did it correct. If the head checks out ok, inspect the block. Otherwise I would order new set of gaskets or try and clean/reuse your current cometics and prep them a tad different next time. Was the gasket bore larger then the chamber of the cylinder head?
Trending Topics
#9
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
well took heads to shop to day and pressure checked them they was good head gasket was good checked top of block it looked good so i put it all back togather well got it back running well no luck same thing well i took belt off to see if it may have something to do with water pump wit still same thing so next i took Thermostat out and put belt back on well it help some but still builing pressure in Coolant
#10
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
well took heads to shop to day and pressure checked them they was good head gasket was good checked top of block it looked good so i put it all back togather well got it back running well no luck same thing well i took belt off to see if it may have something to do with water pump wit still same thing so next i took Thermostat out and put belt back on well it help some but still builing pressure in Coolant
#14
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: mobile al
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
i did but did not see anything well i got a coolant pressure tester i got 26 pis on it to see if i can find any cracks or get some cule of whats going on but ya i kinda thinking somthing wrong with block but i have never seen a lq9 or 4 block craked but its my kinda of luck i will have one
#15
TECH Veteran
iTrader: (11)
i did but did not see anything well i got a coolant pressure tester i got 26 pis on it to see if i can find any cracks or get some cule of whats going on but ya i kinda thinking somthing wrong with block but i have never seen a lq9 or 4 block craked but its my kinda of luck i will have one
You might have to pull it and magnaflux the block.
#20
TECH Addict
iTrader: (15)
is it a line from the front coolant bypass crossover? or do you have it running straight from head?
Also i have seen excessive coolant pressure caused by a bad radiator cap...i know its simple but it DOES happen...
I always approach things with the KISS method, and then if that dont work i got to the more in depth reasons it could be acting up...
Good luck man, hope you get her fixed...
Also i have seen excessive coolant pressure caused by a bad radiator cap...i know its simple but it DOES happen...
I always approach things with the KISS method, and then if that dont work i got to the more in depth reasons it could be acting up...
Good luck man, hope you get her fixed...