6.0L flat pistons with LS3 heads?
#21
TECH Enthusiast
My LS3 specs at 0.135"ptv on intake and 0.185"ptv on exhaust. We found that trying to run a cam with relativly small duration but tight (113) lobe seperation. Wouldn't fit due to valve clearance problems. If your going to run a wide lobe seperation like GM with short duration, you'll be fine, its when you try to modify, that will get you into major problems.
#22
TECH Enthusiast
#23
http://www.chevrolet.com/performance...ines/ls376-525
so there is your answer