Aluminum 441 build on corn
#1
Aluminum 441 build on corn (UPDATED with dyno results)
I have decided to make a build thread for the new motor going into the car by hopefully Spring 2015. The car is going from a cam only LS1 to an LS7 based 441 and built 4L60E to a PowerGlide. The motor is in the beginning stages. The shortblock is complete and now im in the process of deciding on what cam and heads to run. It will be a high compression all motor setup, which I may decide to spray in the future and why I went with Callies/ Wiseco forged internals. I plan on this being a 90/10 strip/street setup. Your opinions and advice is welcome and Ill keep the updates and pics coming as I go. Im sure Ill have a lot of questions so ill be visiting this thread quite frequently.
Last edited by BennyB; 05-30-2020 at 12:19 AM.
#4
What sort of compression are you planning on running? Also what bore and stroke are you running? I built a 454 with some aftermarket casting ls7 heads...my thread is in my signature if you want to take a look....Hoping to dyno mine next week...
#5
I have read through your entire build thread Briou and that's going to be one badass build for sure. I'm patiently waiting for the dyno results . A lot of the questions I had have been answered in your thread and I'm sure I'll have more as I go through my build. Anyways thanks for checking out my build as I continue to follow yours.
Trending Topics
#13
TECH Veteran
Is you plan on running LS7 heads on the motor?
#14
TECH Fanatic
iTrader: (10)
Join Date: Mar 2011
Location: Miami gardens FL 33055
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Hey Benny I like your project got you these link of my last 440 ci ls7 (on corn) build hope it helps, let me know if you have any questions I'll be happy to help dino report on post 79.
https://ls1tech.com/forums/generatio...pic-pg3-4.html
https://ls1tech.com/forums/generatio...pic-pg3-4.html
#18
Hey Benny I like your project got you these link of my last 440 ci ls7 (on corn) build hope it helps, let me know if you have any questions I'll be happy to help dino report on post 79.
https://ls1tech.com/forums/generatio...pic-pg3-4.html
https://ls1tech.com/forums/generatio...pic-pg3-4.html
#20
got the heads bought. LS7 castings ported by cary. Im going to have them cleaned up, new valve guides and milled. I havent had a whole lot of time been working crazy hours to fund the build and hopefully have everything said and done by next spring. I have also been working with Martin at Tick performance the whole way so far, great guy to deal with.