F-1X Procharged C6 Z06 Build | Pics & Video
 

-ERL 427 cu in 6-Bolt Short Block w/ Callies Dragon Slayer Crankshaft, Callies Ultra Billet Connecting Rods, Wiseco Pistons
-Brodix 6-Bolt LS7 Cylinder Heads Ported and Polished by Advanced Inductions
-RPM B3 Cam
-American Racing 2" Long Tube Headers w/o Cats
-Corsa Sport Axle Back System
-Procharger F1X w/ A&A Corvette Bracket, A&A Corvette Flip Drive and A&A Corvette 8 Rib Belt System
-RPM Transmissions Level VII TR6060
-RPM Transmissions Stage 4 Rear Differential
-RPS Triple Carbon Clutch Assembly
-RPM Transmissions Fully Built Torque Tube w/ DSS Driveshaft
-Custom RPM Fuel System w/ Dual Holley Billet Fuel Pumps
-ProMeth Methanol System
-Holley Dominator EFI Vehicle Management System


https://c1.staticflickr.com/5/4402/3...cb0efa86_b.jpg

https://c1.staticflickr.com/5/4428/3...1a97b311_b.jpg

https://c1.staticflickr.com/5/4349/3...c043a268_b.jpg

https://c1.staticflickr.com/5/4350/3...eaeee0ae_b.jpg

https://c1.staticflickr.com/5/4369/3...da930d9f_b.jpg

https://c1.staticflickr.com/5/4396/3...7d901bd6_b.jpg

https://c1.staticflickr.com/5/4421/3...e574b7ff_b.jpg

https://c1.staticflickr.com/5/4398/3...1154a103_b.jpg

https://c1.staticflickr.com/5/4384/3...f455d349_b.jpg

https://c1.staticflickr.com/5/4394/3...324f4dd1_b.jpg

https://c1.staticflickr.com/5/4377/3...f300763b_b.jpg

https://c1.staticflickr.com/5/4333/3...d5b20457_b.jpg

https://c1.staticflickr.com/5/4441/3...c2c99436_b.jpg

https://c1.staticflickr.com/5/4403/3...b307d2a9_b.jpg

https://c1.staticflickr.com/5/4434/3...6901387d_b.jpg

https://c1.staticflickr.com/5/4424/3...187743e3_b.jpg

https://c1.staticflickr.com/5/4413/3...a59826b8_b.jpg

https://c1.staticflickr.com/5/4372/3...363e136a_b.jpg

https://c1.staticflickr.com/5/4392/3...acf45f5e_b.jpg

https://c1.staticflickr.com/5/4338/3...74a589c6_b.jpg

https://c1.staticflickr.com/5/4335/3...f901bf51_b.jpg

https://c1.staticflickr.com/5/4349/3...035f72c9_b.jpg

https://c1.staticflickr.com/5/4374/3...b533b247_b.jpg

https://c1.staticflickr.com/5/4339/3...e9da2828_b.jpg

https://c1.staticflickr.com/5/4370/3...5156e581_b.jpg

https://c1.staticflickr.com/5/4334/3...233ab070_b.jpg

1253 on pump
1315 on 55% E

https://c1.staticflickr.com/5/4392/3...758349de_c.jpg

That's a sick build. How much boost to make 1300?

Also don't be alarmed when some come along to tell you how dumb it is to spend that much money on aftermarket cylinder heads when stock casting could do the same thing.

25.6 lbs we go over a lot of it in the video.


And all washed up and ready for the customer to pick up

https://c1.staticflickr.com/5/4407/3...f5b91c6a_b.jpg

https://c1.staticflickr.com/5/4333/3...362d3db3_b.jpg

https://c1.staticflickr.com/5/4394/3...2bc64b0e_b.jpg

https://c1.staticflickr.com/5/4415/3...f3afe901_b.jpg

https://c1.staticflickr.com/5/4386/3...e525c314_b.jpg

https://c1.staticflickr.com/5/4430/3...93a48d7b_b.jpg

https://c1.staticflickr.com/5/4358/3...1ef15935_b.jpg

https://c1.staticflickr.com/5/4375/3...907b0ba4_b.jpg

https://c1.staticflickr.com/5/4331/3...c06242f7_b.jpg