Head porting... SWIRL VEIN?
#41
TECH Fanatic
iTrader: (2)
Lol.
My BES ported LS7 heads have the wing taken out but the port floor has a heavy amount of taper to it. Don't know how it compares to a factory port. I assume is slows down the air by the cylinder wall and tries to speed it up towards the center of the bore but I don't know. I haven't run these but I've heard good things. They're ~285cc. You can see witness of where the wing was but it is pretty much entirely gone.
My BES ported LS7 heads have the wing taken out but the port floor has a heavy amount of taper to it. Don't know how it compares to a factory port. I assume is slows down the air by the cylinder wall and tries to speed it up towards the center of the bore but I don't know. I haven't run these but I've heard good things. They're ~285cc. You can see witness of where the wing was but it is pretty much entirely gone.
#43
TECH Addict
iTrader: (3)
First do you port heads? if not don't reply. I'll give you a list that says otherwise... Darin Morgan, Greg Good Chad lively Gavin at SPS did until he sold to AI. Phil at AI, LME Mast and a few others...but you port them they way you want..makes no diff to me...this is why i've stopped posting in over 2 years.. an will be my last...because of people like you...
The following users liked this post:
G Atsma (02-12-2021)
#44
TECH Senior Member
First do you port heads? if not don't reply. I'll give you a list that says otherwise... Darin Morgan, Greg Good Chad lively Gavin at SPS did until he sold to AI. Phil at AI, LME Mast and a few others...but you port them they way you want. makes no diff to me...this is why I've stopped posting in over 2 years.. an will be my last...because of people like you...
You like to drop a bunch of names who do porting, besides yourself.
I've quit paying attention to people with major attitude... because of people like you.
Don't worry, you will not be missed....
Last edited by G Atsma; 02-12-2021 at 11:22 PM.
#45
ModSquad
iTrader: (6)
Z0sicktanner has been porting heads for many years and knows his way around a bench very well. What’s puzzling is that he’s responding to a thread that was replied to almost 3 years ago. I haven’t seen him on here in awhile, and his knowledge will be missed. Too bad he doesn’t know who WE TODD DID actually is. I wish engine builders would use their real life names here. It would eliminate fussy stuff like this.
#46
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Originally Posted by Che70velle
Z0sicktanner has been porting heads for many years and knows his way around a bench very well. What’s puzzling is that he’s responding to a thread that was replied to almost 3 years ago. I haven’t seen him on here in awhile, and his knowledge will be missed. Too bad he doesn’t know who WE TODD DID actually is. I wish engine builders would use their real life names here. It would eliminate fussy stuff like this.
#47
ModSquad
iTrader: (6)
The following users liked this post:
G Atsma (02-12-2021)
#48
TECH Senior Member
#49
Staging Lane
No when your told your wrong for 15 years it gets old. like all the info I gave about the valve guides to be banned from platforms for telling the truth. truth is people don't want the truth unless its from someone with so called authority on the subject. Nothing I have ever posted was false or I wouldn't post it. from my own porting research R&D testing at the track. reason I posted is because I logged in an seen the reply to my last post. didnt look at the date. sorry i've went back an deleted all my post now...good luck to you guys. Seems my info stands.
The following users liked this post:
G Atsma (02-13-2021)
#51
No when your told your wrong for 15 years it gets old. like all the info I gave about the valve guides to be banned from platforms for telling the truth. truth is people don't want the truth unless its from someone with so called authority on the subject. Nothing I have ever posted was false or I wouldn't post it. from my own porting research R&D testing at the track. reason I posted is because I logged in an seen the reply to my last post. didnt look at the date. sorry i've went back an deleted all my post now...good luck to you guys. Seems my info stands.
Yeah ______ u Zo6. BTW Eric is just as Good as the names u listed. Asked how do I know? I know Ever Name u listed!
The following users liked this post:
G Atsma (02-13-2021)
#52
Btw: you've got only 1 ban, me 😂🤣😆🤔😜🤫. Stop the crying and go get the baby or don't post. Go erase all your other threads if you feel that way 🤫 some of which I have Booked marked.
Just Do it, like ______
👍
Just Do it, like ______
👍
The following users liked this post:
G Atsma (02-13-2021)
#54
You may not remember me saying it Takes Many Moons to get the CID matched to a particular Combination. 👍 about a Wks time+. Was told for the Time and $ 👉 High Ram. Ole Question of why ER didn't use the CID on the EMC Build....besides the obvious x2 4500's and the perfect runner length for the EMC event.
#55
Staging Lane
Moderator. I was getting complaints of people. I don't complain to mods. fact. i'll delete the other threads..I only have 4 or 5
@KCS
Join Date: Mar 2005
Location: Conroe, TX
Posts: 8,706
Likes: 71
Received 131 Likes on 90 Posts
Default Re: threadQuote:
Originally Posted by z0sicktanner
Quote:
Originally Posted by KCS
Quote:
Originally Posted by z0sicktanner
Guys like that seem to know everything about porting cylinder heads, but have never picked up a grinder. It gets annoying when they
I posted a vid on that thread ...if I cant do that please dont ban me i'll be a vendor in a few weeks...thanks man sorry for any bs... KCS>>>
No worries, I'm not trying to ban you. Just do me a favor and take a break from posting pictures of your work. It looks like you're showcasing your abilities for your business and it's causing some complaints. Technical discussion and debate is perfectly fine, though, just take it easy on the pictures and videos of your work for a while.
__________________
2011 Cadillac Escalade Platinum
2000 Pontiac Trans Am
1999 Camaro Z28
1988 Ford Mustang
1974 Oldsmobile Omega
#57
Staging Lane
intake engine builder wanted below
Last edited by z0sicktanner; 02-13-2021 at 04:39 PM.
The following users liked this post:
KCS (02-13-2021)
#59
This is Ls1Sales....don't complain, out think the BS.
reason I don't like Pro Stock John and the group who sold tech. John started a thread on YB called let's make YB great again. I Posted thread title change. In reality I wanted to say 🖕 u Pro Stock take your B as back to what u started.
Didn't wanna seem like a hater.. I am Hope u read this B€^°√
I've called out folks on here nicely and drunk still Stand by what I said.... Your point being Zo6
Outthink the BS. They talked about Jesus. If you make Hp post it and don't 😭
reason I don't like Pro Stock John and the group who sold tech. John started a thread on YB called let's make YB great again. I Posted thread title change. In reality I wanted to say 🖕 u Pro Stock take your B as back to what u started.
Didn't wanna seem like a hater.. I am Hope u read this B€^°√
I've called out folks on here nicely and drunk still Stand by what I said.... Your point being Zo6
Outthink the BS. They talked about Jesus. If you make Hp post it and don't 😭
#60
Moderator
iTrader: (20)
Fair enough....as for the engine builder im not allowed to post videos or pictures here...message from mod in 2015. if need be I can get a picture of it. KCS
Moderator. I was getting complaints of people. I don't complain to mods. fact. i'll delete the other threads..I only have 4 or 5
Moderator. I was getting complaints of people. I don't complain to mods. fact. i'll delete the other threads..I only have 4 or 5
And HERE is the thread and a post where you were trying to generate traffic to your page, which is against the rules.