Panicking. Please help me identify this piece...
#1
Teching In
Thread Starter
Join Date: Oct 2010
Location: Anthem, AZ
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Panicking. Please help me identify this piece...
First time through an engine rebuild. It's an LS7. However, the only internal part I've changed is the cam. I am not familiar with every internal part of the LS7. I'm desperate to determine whether or not this piece came from my engine.
I have the engine on a stand and the oil pan has been off the last couple of days. Today I found this piece sitting on the floor directly under the engine. I cleaned and vacuumed my shop a couple of days ago so I'm pretty sure this didn't come from any other source.
Obviously, before I proceed I need to determine without a doubt that this piece did not come from somewhere inside the engine.
Thanks for any help!!!
I have the engine on a stand and the oil pan has been off the last couple of days. Today I found this piece sitting on the floor directly under the engine. I cleaned and vacuumed my shop a couple of days ago so I'm pretty sure this didn't come from any other source.
Obviously, before I proceed I need to determine without a doubt that this piece did not come from somewhere inside the engine.
Thanks for any help!!!
#2
11 Second Club
iTrader: (3)
I'm no expert but I haven't seen anything like that in the engine I built. Anyone else care to enlighten us?
#3
TECH Senior Member
#5
TECH Senior Member
#7
TECH Senior Member