TFS 245 vs. TFS 260
#641
Boy the weak and lame R plentyful = Rkupon. own $1k lifters btw. 260 @ .050 =7500 113+4 lsa. Go back and look @ your builder sounds Weak and a newbie builder....
Just for lames at 7500 wonder how well it would do with with 12.2+ compression? 427 chump. Send this to your none building engine builder. Ls3 head 4 the win. Vs what your builder thinks and a Ls7. Again Lame. Camming can be changed for those who look for less over lap.
https://webcache.googleusercontent.c...&ct=clnk&gl=us
Have better parts than the 414 listed on post #26 same heads used and a 4500 not a single bore tb & elbow. (chris gave me the run down also) Also when did 8k become high for rpm with the other combo & more compression. 8500. Where did that come from?
https://www.yellowbullet.com/forum/s...=633402&page=2
Lames belive anything.. Eagle h beam rods and crank balanced is good ...BES uses them with NOS & 8500+
https://ls1tech.com/forums/parts-cla...id-roller.html
Just for lames at 7500 wonder how well it would do with with 12.2+ compression? 427 chump. Send this to your none building engine builder. Ls3 head 4 the win. Vs what your builder thinks and a Ls7. Again Lame. Camming can be changed for those who look for less over lap.
https://webcache.googleusercontent.c...&ct=clnk&gl=us
Have better parts than the 414 listed on post #26 same heads used and a 4500 not a single bore tb & elbow. (chris gave me the run down also) Also when did 8k become high for rpm with the other combo & more compression. 8500. Where did that come from?
https://www.yellowbullet.com/forum/s...=633402&page=2
Lames belive anything.. Eagle h beam rods and crank balanced is good ...BES uses them with NOS & 8500+
https://ls1tech.com/forums/parts-cla...id-roller.html
Last edited by Smokey B; 05-12-2019 at 10:53 AM.
#642
Your welcome kupon1. Copy and give it to your builder, slap him on the as and tell him to step it up.
6k stall street car....lame and not knowledgeable, on what's been done.
https://ls1tech.com/forums/conversio...ang-build.html
People i've dealt with all had smiles... no matter the combo mild or wild. I prefer wilder ..lames are kill'ed & eaten. Ls3 head referral...
https://www.yellowbullet.com/forum/s....php?t=1309362
6k stall street car....lame and not knowledgeable, on what's been done.
https://ls1tech.com/forums/conversio...ang-build.html
People i've dealt with all had smiles... no matter the combo mild or wild. I prefer wilder ..lames are kill'ed & eaten. Ls3 head referral...
https://www.yellowbullet.com/forum/s....php?t=1309362
Last edited by Smokey B; 05-12-2019 at 10:32 AM.
#644
#645
Stay off the grass? U didn't even see Darin's name even listed as Higgins Ls head porter. And it's list on every CSA cnc program listed?
You may need to smoke. No rookie here good buddy. Builder says it looks to do a little something...this from a emc winner, have a few i deal with...i'm Paco.
You may need to smoke. No rookie here good buddy. Builder says it looks to do a little something...this from a emc winner, have a few i deal with...i'm Paco.
#646
Stay off the grass? U didn't even see Darin's name even listed as Higgins Ls head porter. And it's list on every CSA cnc program listed?
You may need to smoke. No rookie here good buddy. Builder says it looks to do a little something...this from a emc winner, have a few i deal with...i'm Paco.
You may need to smoke. No rookie here good buddy. Builder says it looks to do a little something...this from a emc winner, have a few i deal with...i'm Paco.
We both know this.
And now you are trying to say it's lame for me to agree with someone who I believe has a valid point about the longevity of an LS stroker revving to 8500rpm?
If you are not smoking, maybe you are on the magic mushrooms.
#647
Again where is 8500 coming from? ....stock 5.0's rev to 7500
8k build, was sent a pm of the cam specs along with others liked *some cam specs not listed, given thru pm's* and none are over 8k and all made 800+ from 408 to 440's
https://www.yellowbullet.com/forum/s...490536&page=11
pm from PuRpS:
i'm looking @ 5 degrees less in intake duration yet more lsa...for 8k. Not 8500.
8k build, was sent a pm of the cam specs along with others liked *some cam specs not listed, given thru pm's* and none are over 8k and all made 800+ from 408 to 440's
https://www.yellowbullet.com/forum/s...490536&page=11
pm from PuRpS:
2nd cam made 8--+ that was 275/290 with (1.8 rocker) ur 23 and ur 25 grinds from lunati from memory.
i'm looking @ 5 degrees less in intake duration yet more lsa...for 8k. Not 8500.
Last edited by Smokey B; 05-12-2019 at 12:02 PM.
#648
TECH Senior Member
#649
G....for every new build seen, can find a older similar thread. That's the killing part.
I can't be no worse than the crazy airline driver... or this crazy mf"er who killed the little girl cause a girl left him here in Houston. Or all these mass shootings. Real talk.
Noticed
Every time Germany has been a economic power there has been a world war? And man has never created something *Weapon* he hasn't used. 4 stroke engine..to simple me friend.
Basic Instruction Before Leaving Earth. Nothing can't be out thought... people included or the basic 4 strokes.
I can't be no worse than the crazy airline driver... or this crazy mf"er who killed the little girl cause a girl left him here in Houston. Or all these mass shootings. Real talk.
Noticed
Every time Germany has been a economic power there has been a world war? And man has never created something *Weapon* he hasn't used. 4 stroke engine..to simple me friend.
Basic Instruction Before Leaving Earth. Nothing can't be out thought... people included or the basic 4 strokes.
#650
TECH Addict
iTrader: (3)
Boy the weak and lame R plentyful = Rkupon. own $1k lifters btw. 260 @ .050 =7500 113+4 lsa. Go back and look @ your builder sounds Weak and a newbie builder....
Just for lames at 7500 wonder how well it would do with with 12.2+ compression? 427 chump. Send this to your none building engine builder. Ls3 head 4 the win. Vs what your builder thinks and a Ls7. Again Lame. Camming can be changed for those who look for less over lap.
https://webcache.googleusercontent.c...&ct=clnk&gl=us
Have better parts than the 414 listed on post #26 same heads used and a 4500 not a single bore tb & elbow. (chris gave me the run down also) Also when did 8k become high for rpm with the other combo & more compression. 8500. Where did that come from?
https://www.yellowbullet.com/forum/s...=633402&page=2
Lames belive anything.. Eagle h beam rods and crank balanced is good ...BES uses them with NOS & 8500+
https://ls1tech.com/forums/parts-cla...id-roller.html
Just for lames at 7500 wonder how well it would do with with 12.2+ compression? 427 chump. Send this to your none building engine builder. Ls3 head 4 the win. Vs what your builder thinks and a Ls7. Again Lame. Camming can be changed for those who look for less over lap.
https://webcache.googleusercontent.c...&ct=clnk&gl=us
Have better parts than the 414 listed on post #26 same heads used and a 4500 not a single bore tb & elbow. (chris gave me the run down also) Also when did 8k become high for rpm with the other combo & more compression. 8500. Where did that come from?
https://www.yellowbullet.com/forum/s...=633402&page=2
Lames belive anything.. Eagle h beam rods and crank balanced is good ...BES uses them with NOS & 8500+
https://ls1tech.com/forums/parts-cla...id-roller.html
Somebody please ban this troll as he really brings nothing to this table. Just drama and drunken banter. To many people argueing with him to ignore how much he sux!
Last edited by rkupon1; 05-12-2019 at 02:03 PM.
#652
ModSquad
iTrader: (6)
Let’s keep this civil folks.
#654
TECH Addict
iTrader: (3)
Im not here to pretend about anything or prove anything. I admit i dont know everything, im an hvac business owner, not a hardcore race car/engine builder. Im building a streetcar. I dont care bout your nonsense credentials n theories. Im hiding nothing, your hiding everything. Y is that? Im done communicating with you and outta this thread. Clown
#655
ModSquad
iTrader: (6)
This one is done guys.