Quiet Cam Help for LSX454
#41
Same IVO/EVC/Overlap if you add 4 degrees exhaust duration to their Stage 2 LS7. Nuttin' fancy with those numbers when you look at it that way! lol
Last edited by 68Formula; 06-16-2020 at 12:53 PM.
#43
TECH Fanatic
iTrader: (5)
I'd just pull the trigger with them - you'll be very happy with it.
#44
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Originally Posted by spanks13
It is nearly identical to what I recommended in my first post. I like that they went a bit higher than usual on the lift for the bigger engine and high flow heads. It is a little bigger version of the cam I ground for my 402 with the same objective - stealth cam that will make some power.
I'd just pull the trigger with them - you'll be very happy with it.
I'd just pull the trigger with them - you'll be very happy with it.
The following users liked this post:
spanks13 (06-16-2020)
#45
It is nearly identical to what I recommended in my first post. I like that they went a bit higher than usual on the lift for the bigger engine and high flow heads. It is a little bigger version of the cam I ground for my 402 with the same objective - stealth cam that will make some power.
I'd just pull the trigger with them - you'll be very happy with it.
I'd just pull the trigger with them - you'll be very happy with it.
I already have this cam laying around 236/248 .634”/.634” 117 LSA +3 advance.
How would this compare with the one they spec'd for me?
#46
#47
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Given your OP and follow up posts, I would advise you to go with the cam motion cam rather than to use the one laying around.
Say for example, you decide to use the one laying around, because you can always swap it out if you don't like it. Fluids, gaskets, and potentially pushrods can end up more expensive than the cam
#49
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
You've reached paralysis by analysis.
TBH, if I had that cam laying around, I'd just use it and get the car running. If you don't like it, order the cam motion cam, which will be milder. There are hundreds or even thousands of possible combinations, and you can really twist yourself into a know. In the mean time, you're not enjoying the car. Just get it running.
My gut feeling is that you will end up ordering the cam motion 232/242
TBH, if I had that cam laying around, I'd just use it and get the car running. If you don't like it, order the cam motion cam, which will be milder. There are hundreds or even thousands of possible combinations, and you can really twist yourself into a know. In the mean time, you're not enjoying the car. Just get it running.
My gut feeling is that you will end up ordering the cam motion 232/242
#50
You've reached paralysis by analysis.
TBH, if I had that cam laying around, I'd just use it and get the car running. If you don't like it, order the cam motion cam, which will be milder. There are hundreds or even thousands of possible combinations, and you can really twist yourself into a know. In the mean time, you're not enjoying the car. Just get it running.
My gut feeling is that you will end up ordering the cam motion 232/242
TBH, if I had that cam laying around, I'd just use it and get the car running. If you don't like it, order the cam motion cam, which will be milder. There are hundreds or even thousands of possible combinations, and you can really twist yourself into a know. In the mean time, you're not enjoying the car. Just get it running.
My gut feeling is that you will end up ordering the cam motion 232/242