TFS 235cc vs Stage 3 LS6 on stroker graph inside
08-29-2007, 08:34 AM
#41
11 Second Club
iTrader: (8)
Join Date: Aug 2002
Location: Houston/Austin/Ft. Worth
Posts: 1,453
Likes: 0
Received 1 Like
on
1 Post
It made great power congrats!!! I have been meaning to get my fast intake and tb both ported they are showing major restriction and choking my heads. I expect to see gains of 15-20rwhp, but only up top right now my graph flatlines at 6200-7000 stays right around 526rwhp. Your gains show that the heads helped out alot under the curve and well all over the place with the drop in comp.
Thomas
Thomas
08-29-2007, 11:31 AM
#42
Banned
iTrader: (3)
Join Date: May 2007
Location: Richardson, TX
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeremym
How much for the adj timing set?
Id be a little leary of your current shop if they never degreed it in the first place. If they did, my apologies but because you dont have an adjustable timing set or the stock set bushing'd with degree bushings something tells me they installed it without degreeing and especially since its got advance ground in. Id rather grind a cam straight up and degree it for my power curves im trying to generate then guess and advance it 4 degrees off of the ICL to get it to run down low. Sounds like a bunch of flat rating going on if I had to say so.
08-29-2007, 01:28 PM
#43
TECH Enthusiast
iTrader: (32)
Join Date: Aug 2005
Location: The great state of Tejas!
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WOTFMAN
Id rather grind a cam straight up and degree it for my power curves im trying to generate then guess and advance it 4 degrees off of the ICL to get it to run down low. Sounds like a bunch of flat rating going on if I had to say so.
