Speedmaster procomp shaft mounted rockers
#1
Registered User
Thread Starter
Speedmaster procomp shaft mounted rockers
Retaining circlips
Worn roller cages
I have just pull a set of PCE261.1246 Speedmaster procomp ls2-3 Shaft Mount 1.7 ratio black Aluminum rocker arm set after one broke less than 2000klm with pac1208 valve springs and 130lb seat pressure.
5 sets of rockers had there needle roller cages worn through the edges exposing the needle rollers and 4 had the rocker retaining circlips wearing into the rockers making metal.
This could have been messy BEWARE!!!!
Last edited by Onsta; 07-25-2018 at 04:55 AM. Reason: Bad photo
#2
10 Second Club
iTrader: (8)
Ouch....i have installed 2 sets of their 1.9s. But the ones i have are steel. One set has been on my uncles 5.3 for probably atleast 5k miles. I just put a set on my ls6 but haven't ran it yet. I'm using psi1511 springs on it and ls6 springs on his.
the shaft looks identical tho.
the shaft looks identical tho.
#4
Registered User
Thread Starter
#6
TECH Senior Member
#8
TECH Senior Member
#9
Lol tff