fast 92mm
10-27-2009, 05:32 PM
#2
ok, Ill throw a deal out there.
we have recently had some great success porting the FAST 92 intakes (see our thread in the dyno results section) so if I can get 5 people heres the deal.
A new FAST 92mm intake, ported by us for 919.00 shipped anywhere in the continental U.S.
our typical gains on the dyno have been between 10 and 15 rwhp over the factory FAST intake.
the vast majority of the port work takes place on the upper shell. The ports have not shown a significant gain so we do not focus our attention there, but we still do some mile port work in that area.
Let me know if there are 5 people interested and we can go from there.
thanks.
we have recently had some great success porting the FAST 92 intakes (see our thread in the dyno results section) so if I can get 5 people heres the deal.
A new FAST 92mm intake, ported by us for 919.00 shipped anywhere in the continental U.S.
our typical gains on the dyno have been between 10 and 15 rwhp over the factory FAST intake.
the vast majority of the port work takes place on the upper shell. The ports have not shown a significant gain so we do not focus our attention there, but we still do some mile port work in that area.
Let me know if there are 5 people interested and we can go from there.
thanks.
Trending Topics
10-31-2009, 07:47 AM
#9
excellent.
Here is how I would like to work this. I will need a 250.00 non refundable deposit from everyone. Once I have everyones deposit, I will pick up the 5 intakes from FAST (we are only 20 mins down the road from them).
obviously if 3 of you give me the deposit and the other two back out, I will refund your deposits. "non refundable" means that if everyone pays the deposit, and I start porting the intakes, and you just change your mind....well, I dont want to get stuck with an intake.
Once I have all of the deposits and intakes at my shop, I will need a few days to get them all ported. We have been super busy at the shop and there is still only two of us (the owners) who work there.....so if you guys would allow me a full week to get everything ported and shipped that would be great.
I will keep everyone updated on progress via this thread. I am very big on communication. If you have a question you need answered ASAP then you can always call us at the shop. Lately we havent been on this site as much because of our work load.
I know one person here said they were waiting on a bonus check so if you guys all want to coordinate with that person and decide on a specific date that you all want to call in your deposits that is fine with me. We accept all major CCs.
The balance of your bill (669.00) will be billed to your CC the day the intake ships. All intakes will ship via FedEx ground.
Thanks and let me know if there are any questions.
Jeff
Here is how I would like to work this. I will need a 250.00 non refundable deposit from everyone. Once I have everyones deposit, I will pick up the 5 intakes from FAST (we are only 20 mins down the road from them).
obviously if 3 of you give me the deposit and the other two back out, I will refund your deposits. "non refundable" means that if everyone pays the deposit, and I start porting the intakes, and you just change your mind....well, I dont want to get stuck with an intake.
Once I have all of the deposits and intakes at my shop, I will need a few days to get them all ported. We have been super busy at the shop and there is still only two of us (the owners) who work there.....so if you guys would allow me a full week to get everything ported and shipped that would be great.
I will keep everyone updated on progress via this thread. I am very big on communication. If you have a question you need answered ASAP then you can always call us at the shop. Lately we havent been on this site as much because of our work load.
I know one person here said they were waiting on a bonus check so if you guys all want to coordinate with that person and decide on a specific date that you all want to call in your deposits that is fine with me. We accept all major CCs.
The balance of your bill (669.00) will be billed to your CC the day the intake ships. All intakes will ship via FedEx ground.
Thanks and let me know if there are any questions.
Jeff
10-31-2009, 08:00 AM
#10
https://ls1tech.com/forums/dynamomet...ng-fast-3.html
if you are interested in doing this, I would suggest you read the above thread. I want everyones expectations to be realistic for sure. I think anything from 10 to 15 rwhp would be a realistic expectation.
We did gain 26 rwhp in one test, but we are fairly certain that was a fluke and it is definately not the norm.
Thanks.
if you are interested in doing this, I would suggest you read the above thread. I want everyones expectations to be realistic for sure. I think anything from 10 to 15 rwhp would be a realistic expectation.
We did gain 26 rwhp in one test, but we are fairly certain that was a fluke and it is definately not the norm.
Thanks.
11-04-2009, 06:28 AM
#16
Just do a search on this site to see what kind of gains the FAST 92 makes. I really dont want to get into telling people what kind of power to expect.
See the thread I posted here showing the gains we have made on our dyno.
These intakes, unported, typically see very nice gains though....and the port work just adds another 10-15 at the rear wheels.
Thanks.
11-04-2009, 02:58 PM
#19
I only have one confirmed.
Once all deposits are in, I will pick the intakes up from FAST and have them ported and ready to ship within 3 days. (Probably actually 2 days but I want to give myself some room here since we are slammed at the shop right now)
Thanks.
Once all deposits are in, I will pick the intakes up from FAST and have them ported and ready to ship within 3 days. (Probably actually 2 days but I want to give myself some room here since we are slammed at the shop right now)
Thanks.