New to the site
#1
Teching In
Thread Starter
Join Date: Feb 2019
Location: Houston Texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
New to the site
Greetings from Houston Texas, I am in the beginning stages of a Pro Turing / Auto Cross Build. Looking forward to Gaining Knowledge and Making New Contacts
Regards
Regards
#5
Teching In
Thread Starter
Join Date: Feb 2019
Location: Houston Texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
TCI
-IFS, Power Rack, C - Notch Frame Rails, Ride Tech Single Adjustable Coil Over all four corners, Rear Sway Bar, Rear Pan Hard Bar, Torque Arm Rear Suspension, Wilwood 13" 6 piston front, 4 piston rear, Tru Trac Posi, 3.50, 56" AFAF rear axel. 5.3 L59 with 4L60E, Ultimate Headers 3", Waiting on Mattson Radiator to come in. I have my eye on Texas Speed Cam stage 2 (212/218) on a high lift 600/600 with 112 LSA with PAC 1219 Springs and 7.400 pushrods.
I welcome input on intake up grade, and if I should remain fuel return, vs return less.
-IFS, Power Rack, C - Notch Frame Rails, Ride Tech Single Adjustable Coil Over all four corners, Rear Sway Bar, Rear Pan Hard Bar, Torque Arm Rear Suspension, Wilwood 13" 6 piston front, 4 piston rear, Tru Trac Posi, 3.50, 56" AFAF rear axel. 5.3 L59 with 4L60E, Ultimate Headers 3", Waiting on Mattson Radiator to come in. I have my eye on Texas Speed Cam stage 2 (212/218) on a high lift 600/600 with 112 LSA with PAC 1219 Springs and 7.400 pushrods.
I welcome input on intake up grade, and if I should remain fuel return, vs return less.