New here little info
#1
8 Second Club
Thread Starter
Join Date: Sep 2006
Location: BRICK NJ
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
New here little info
Been on this site tons of times and finally got around to signin up. I do not drive an LSx but have a 91 Camaro as a race car. Here are some pics, vids and some time slips
http://home.comcast.net/~ryan97812/launch_atco_sm.JPG
http://home.comcast.net/~ryan97812/tslipsm.JPG
http://home.comcast.net/~ryan97812/dad1st.wmv
http://home.comcast.net/~ryan97812/CAMARO9.wmv
all on 150 shot 4 passes so far
60' ft 1.312 1.336 1.337 1.297
1/8 5.959 5.978 5.955 5.943
mph 115.42 115.58 114.95 115.62
1/4 9.37 9.39 9.36 9.35
Did a few 1/8 mile passes to get used to the car and on the second pass i stood it up on the back bumper past the 60 ft mark with a 1.40 60'
As far as my daily driver i have an 04 acura tl 6 speed with comptech cat back (quiter then a g35) and a comptech s/c. Car puts down 315 to the front and runs 13.6x's but who cares its fwd HAHA. Anyway i am an ase tech for the past 12 years and have done all work besides the cage on the race car. Some of you may have seen it a etown or atco as we've been racing it for the past 10 years in what had started as an enimic 15.9 stock tpi to its current state of a 1.29 60' cuttin 9.35 smacking 143 mph whippin ride. Hope to be welcome amongst some good people on this board. Normally cruise http://www.njfboa.org/ as the same name.
http://home.comcast.net/~ryan97812/launch_atco_sm.JPG
http://home.comcast.net/~ryan97812/tslipsm.JPG
http://home.comcast.net/~ryan97812/dad1st.wmv
http://home.comcast.net/~ryan97812/CAMARO9.wmv
all on 150 shot 4 passes so far
60' ft 1.312 1.336 1.337 1.297
1/8 5.959 5.978 5.955 5.943
mph 115.42 115.58 114.95 115.62
1/4 9.37 9.39 9.36 9.35
Did a few 1/8 mile passes to get used to the car and on the second pass i stood it up on the back bumper past the 60 ft mark with a 1.40 60'
As far as my daily driver i have an 04 acura tl 6 speed with comptech cat back (quiter then a g35) and a comptech s/c. Car puts down 315 to the front and runs 13.6x's but who cares its fwd HAHA. Anyway i am an ase tech for the past 12 years and have done all work besides the cage on the race car. Some of you may have seen it a etown or atco as we've been racing it for the past 10 years in what had started as an enimic 15.9 stock tpi to its current state of a 1.29 60' cuttin 9.35 smacking 143 mph whippin ride. Hope to be welcome amongst some good people on this board. Normally cruise http://www.njfboa.org/ as the same name.